Personal menu

WORLDWIDE SHIPPING

fast, flexible, secure options

ONLINE SUPPORT 24 / 7

anytime, anywhere help

MONEY BACK GUARANTEE

shop with confidence

WIDE SELECTION

every day low prices

Chargers, Cables & Adapters

View as Grid List

Sort by

Display per page

11.1V 2A 3S Output Protection Lithium Battery USB Charger With Light (XH/4P Plug)

Input parameters: 5V 0.5-2.5A
Output parameters: 11.1V 2A
Functional features: strong versatility, LED indication, overcharge protection, overvoltage protection
Aluminum alloy USB interface, corrosion-resistant and anti-oxidation, safer
Built-in intelligent load identification chip, blocking excessive current and voltage, preventing overcharge, overvoltage, overload, and protecting equipment from damage
When the charger charges the 11.1V lithium battery pack, it can be connected to computer equipment, mobile phone adapters, and mobile power supplies for charging
LED light prompt function, the red light goes out when fully charged
Gradually reduce the charging current according to the increase of battery charging power. When the battery voltage is charged to 12.6V, it will automatically shut down the current and stop charging to prevent battery overcharge and damage

C$11.95 C$14.45

For PS5 Controller Dual Charger Charging Stand Docking Station With RGB Ambient Light (White Black)

The charging stand for the PS5 controller and PS5 Elite controller, supports charging 2 controllers at the same time
Automatic power off: When the controller is fully charged, the charging base will automatically power off to protect the battery and extend the service life
Fast charging, charging time is less than or equal to 3 hours
With RGB atmosphere light, touch button for easy switching
Material: ABS
Packing list: charging base, Type-C charging cable, instruction manual

C$22.29 C$26.74

For PlayStation Portal iplay HBP-547 Palm Contact Terminal Portable Charging Stand (White)

Contact terminal charging, goodbye to repeated plugging and unplugging, protect the handle charging port
Overload/short-circuit/overcharge/over-temperature multiple protection, protect the handle from injury
Anti-slip feet on the bottom, not easy to shake
Input/Output: 5V 2.8A
Material: ABS
Weight: about 144g
Description: only the seat charger, does not include other

C$15.44 C$18.68

HONCAM For PS5 Gamepad Charger Dual Dock Charger (Blue)

Compatible with a variety of power devices on the market, environmentally friendly and convenient.
Products with handle charging current intelligent identification function, not afraid of the handle upgrade can not be charged after the trouble.
Built-in multiple protection design: current limit, voltage limit, over-current protection, over-voltage protection, high-voltage protection, short-circuit protection.
Using slot contact charging method, simple and convenient operation, solve the handle alignment difficult troubles.
With charging and full indication function, to ensure that the handle has enough power
Power input interface: USB Type-C
Handle charging method: contact charging
Input voltage: DC 5V

C$21.31 C$24.93

For PS5 VR2/Switch/PS5 Game Controller DOBE Type-C/USB-C Charging Cable

Material: ABS
Interface: Type-C/USB
Applicable products: for PS5/PS5 VR2/Switch controller
Size: 80cm
Weight: 49 grams
Note: only the charging cable, not including the handle and other VR accessories

C$13.31 C$16.50

For PS5 VR2/Switch/PS5 Game Controller DOBE Magnetic Type-C/USB-C Charging Cable

Material: plastic
Interface: Type-C/USB
Applicable products: for PS5/PS5 VR2/Switch controller
Product function: this charging cable only supports charging and supports 360 degree blind suction.
Size: 80cm
Weight: 49 grams
Note: only the charging cable, not including the handle and other VR accessories

C$11.79 C$14.16

For Nintend Wii Console Remote Motion Plus Adapter Sensor (White)

Connect the Motion Plus sensor to your Wii remote, compatible with all original and third-party remotes.
When playing games, the sensing strength of the remote control can be enhanced to make it more realistic.
Simple and convenient to use.
When playing games, as long as there is any shaking of the hand, the controller can accurately display your subtle movements on the screen, making the player feel more real and immersive
Material: ABS
Product size: 4.3CM x 4.3CM x 3.2CM
Note: Accelerator only, silicone cover not included

C$19.09 C$23.29

7.4V Smart Chip Protection USB Plug Lithium Battery Charging Cable (SM-3P)

Interface: SM-3P forward
Input voltage: DC5V 0.5-2A
Output voltage: 7.4V 1000mA
Applicable: home appliances, toys
Rated power: 10.5W
Suitable for all kinds of SM-3P positive interface rechargeable batteries, support multiple charging methods
Aluminum alloy USB interface, good conductivity
High-quality wire is not easy to break

C$6.72 C$7.79

iCharger 1S-10S High Power Balance Charger, Specification: 308duo/1300W

308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.
Weight: about 1.29 kg

C$638.35 C$753.26

iCharger 1S-10S High Power Balance Charger, Specification: 406duo/1400W

308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.
Weight: about 1.29 kg

C$638.35 C$759.64

iCharger 1S-10S High Power Balance Charger, Specification: 4010duo/2000W

308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.
Weight: about 1.29 kg

C$634.95 C$761.93

B3 20W Model Fixed Wing Drone Lithium Battery Charger (EU Plug)

Efficient heat dissipation, balanced charging
Dual charging port design, fast charging
Multiple protections, cell/overvoltage/overcharge/short circuit/undervoltage/temperature/overcurrent protection
Power: 20W
Power supply voltage: 110-240V AC 50-60Hz
Output current: 1.6A
Rechargeable lithium battery: 7.4V 2S, 11.1V 3S
Display mode: 3 dual-color LED indicators

C$15.41 C$19.26

Refine