RC Toys & Accessories

View as Grid List

Sort by

Display per page

For DJI Neo CQT 2pcs Battery Charging Port Protective Cover, Spec: Large

3D printed material, hard plastic shell is resistant to pressure
Can prevent foreign objects from entering, prevent short circuit, prevent the battery contacts from being exposed to moisture and oxidation for a long time
Quick installation, easy to carry
Material: plastic
Weight: small size about 3g, large size about 8g
Note: only dust cover, not include other

C$11.88 C$13.66

For DJI Mavic 2 Pro &Zoom Airdrop System Drone Thrower

Suitable for DJI Mavic 2 Pro/Zoom drones
Can be remotely dispatched, used for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc.
USB charging, quick release, one-touch control by remote control.
Lightweight and safe, neither adding to the burden of the drone nor damaging the drone, easy to install and remove.
Bottom mounting kickstand, does not affect the propeller and sensors!
Other parameters:
Main material: ABS
Built-in battery capacity of 150 mAh

C$40.54 C$47.43

PGYTECH Mini Focus Handgrip Mount For DJI Ronin RS 3/RS 3 Pro/RS 2/RSC 2 (Black)

Low-angle labor-saving shooting, to reduce the center of gravity of the handheld grip instead of the traditional vertical grip, effectively alleviating hand fatigue caused by prolonged shooting
Two kinds of expansion interface: Arri 1/4 interface / cold shoe interface, according to the scene can be added monitor, magic hand, microphone, etc.
Adapt NATO interface, disassembly and assembly is convenient and quick
Aluminum alloy one-piece molding, strong and durable
Compatible models: for DJI RS 3/RS 3 Pro/RS 2/RSC 2
Main material: aluminum alloy
Product size: 190 x 70 x 34mm

C$67.61 C$79.78

For DJI Spark Mavic Air Remote Controller Phone Tablet Holder Mount

Support almost all smartphones (for iPhone 4)
Support 7.9 inch, 9.7 inch, 10.5 inch tablet PC
360 degree rotation, does not affect the use of the lanyard
Adjustable length, 115mm-186mm adjustable
Will not block the USB port, will not block the screen of the controller, will not block the data port of the smartphone
Foldable, easy to carry and store
Material: plastic
Suitable for DJI Spark / DJI Mavic Pro / Air remote control

C$13.59 C$15.89

For DJI Avata BRDRC-9604 4pcs Drone Propeller TPU Protective Guard UAV Bumper Anti-collision Ring Cover (Orange)

Effectively avoid damage to the fuselage due to impact by foreign objects during flight, improving flight safety
Adopt tough material, crash-resistant, reduce accidental damage to the machine
Real machine mold opening, suitable for Avata tailor-made, durable and wear-resistant
Lightweight design, the whole set weighs only 22.3g, which does not affect flight use
Equipped with paste reinforcement mud, which is stable and does not leave glue, easy to install and disassemble
Using tough materials, good impact resistance and compression resistance, reducing accidental damage to the machine
Main material: PP
Size: 9.2x3.5x1.6cm

C$13.86 C$17.04

BRDRC DJI-7559 For DJI Mavic 3/Mini 3/3 Pro Remote Control Silicone Protective Cover (Red)

Made of soft silicone material to prevent foreign objects from colliding or scratching the body
Reinforced surface design, can be kneaded at will without deformation
The surface is sprayed with oil, which is beautiful and generous, and feels comfortable
Easy to remove and install
Real machine mold opening, reasonable hole design, does not affect the use and flight remote control
Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience
Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro
Note: The product only includes a protective case, nothing else

C$11.64 C$13.62

Sunnylife TY-Q9354 For DJI Avata/Mavic 3/Mini 3 Pro Installation AirTag Locator Bracket (White)

Firmly installed, for AirTag can be firmly clamped into the bracket without worrying about falling off
Strong nano adhesive, super viscous, durable and effective
Quick installation, can be pasted anywhere
Wide compatibility and convenient installation
Tear it off without leaving adhesive, and do not worry about leaving offset prints, which will not damage the UAV surface at all
Applicable model: for DJI FPV / Avata / Mavic 3 / Mini 3 Pro / Mini 2 / Mavic Air 2 / Mavic Pro / 4 Pro / Mavic Mini / FIMI X8SE 2020 / Air 2S / Mavic 2, etc
Material: plastic
Net weight: 2g

C$9.88 C$12.36

For DJI Mini 3/Mini 3 Pro BRDRC Propeller Stabilizer Holder Blade Fixer Mount Base (Gray)

The real machine opens the mold, effectively fixes the front and rear propellers, protects the propellers in the folded storage state, and prevents them from being damaged when they are put into the backpack;
It will not squeeze and damage the propeller, and at the same time, it can fix the propeller during storage, so that it is not easy to shake and cross;
Reasonably fix the propeller to fit the fuselage without affecting the use of the lens cap;
Half-wrapped chassis design, the base can wrap the motor at the bottom of the drone when storing, preventing debris from entering the motor;
The paddle has two holes to adjust the tightness, which is easy to install and remove.
Main material: Silicone+ABS
Net weight: 15.8g
Product size: 8.9 x 7.8 x 6.1cm

C$14.01 C$16.67

Glassfiber 325mm Paddle Blade 3D Propeller for 450 Helicopter Accessories

Suitable for 450 helicopter accessories parts.
Easy to assemble and carry.
Ensure stable flight, good balance and excellent performance.
Made of high quality material, light and durable.
Repair damaged or old parts.
Overall length: 325mm/12.80 inches
Propeller width: 33 mm/1.30 inches
Thickness: 4.8mm/0.19inch

C$14.11 C$16.23

For DJI Mavic 3/Mini 2 RCSTQ 100W 2 In 1 Car Charger

PD+QC3.0 fast charging port, supports simultaneous charging of UAV and remote control, bi-directional output design, charging fast enough, can get rid of low battery anxiety
Pure copper contacts, anti-scratch and anti-oxidation, better electrical conductivity, pure copper contact shrapnel, safe and worry-free
Universal interface, intelligent identification switching, compatible with a variety of mainstream flash charging protocols in the market, universal for Apple and Android phones, suitable for mainstream 12V 24V mainstream models in the market
Material: ABS+ aluminum alloy
Input voltage: DC 12V-24V
Output voltage: DC 5V
Compatible products: for DJI MAVIC 3/MINI 2
PD output: 5V 5A/9V 5A/12V 5A/15V 5A/20V 5A

C$36.60 C$43.19

Manti 3 Plus Replacement Umbrella Cabin Parachute for DJI Mavic Air 2/2S/Mavic 3 Improve Safety

Intelligent safety parachute, high-speed rescue, buzzer warning and positioning
Manti 3/Manti 3 Plus has a built-in electronic flight recorder, which can record UAV flight and performance parameters. The information recorded by the recorder can be used for UAV flight accident analysis, reproduce the accident process, and analyze the cause of the accident concretely ( Built-in 150mAh battery, 4 hours working time, 1GB data storage)
Dual sensor data fusion: horizontal and vertical activation, effectively avoiding propeller entanglement, and reducing the additional risk of bombing caused by rescue triggers
The flight attitude can accurately identify the danger and omnidirectional perception, and can respond to the dangerous situation in the fastest 0.5 seconds, so as to judge the opening of the parachute, it needs to cooperate with the inner eight to stop the propeller, so that the machine can make a safe landing
To upgrade the DFU firmware, you need to download the desktop version of the Firefly software, and you can manually select the model to match the firmware
There is a silicone pad design at the bottom of the parachute main unit, which can effectively prevent the drone from being scratched
The umbrella cabin of Manti 3/Manti 3 Plus is for one-time use. After the parachute is opened, the umbrella cabin needs to be replaced before it can be used.
When installing, please be careful not to cover the battery switch and the sensor below

C$55.19 C$66.79

Sunnylife TD487 For DJI Avata/FPV Goggles V2 Color Headband Fixed Elastic Strap (Red)

Personalized pattern, full of sense of design. Original design patterns, clear and bright, make your flying glasses eye-catching enough
Soft and elastic, comfortable to wear, using high-quality elastic band, comfortable and durable.
There is a battery fixing strap, so you dont have to worry about nowhere to put the battery of the glasses during the flight.
The length is adjustable and elastically stretchable. The adjustable buckle can freely adjust the length, and the elastic band is elastic, so you can control it according to your head circumference.
Hook and loop fastener adhesive, strong grip and durable
The thoughtful winding design can neatly fix the power supply wire on the headband to prevent the winding from interfering with the flight
Applicable models: for DJI Avata / Goggles 2 / FPV Goggles V2
Material: elastic band

C$15.44 C$18.37