Specifically designed for DJI Flip batteries, supporting PD 45W+ input, capable of charging 2 batteries simultaneously, and fully charging in approximately 70 minutes (product does not include batteries).
Intelligent power matching and safety guarantee: Automatically switches charging mode based on input power (simultaneously or sequentially charging)
- Greater than or equal to PD 25W: First charge the battery with lower capacity to the same level as the battery with higher capacity, then fully charge both batteries simultaneously
- Less than PD 25W: In charging management mode, charge the batteries in order from high to low according to the capacity
Dual-function design: Charger + portable power bank, converting DJI Flip batteries into a portable power bank, charging external devices such as mobile phones and remote controllers through the 5V/2A USB-A interface.
Dual charging modes to extend battery life:
- Full charge mode: Quickly charge the battery;
- Storage mode: Charge the battery with a capacity lower than 60% to 60%-65%, suitable for long-term storage (batteries with a capacity higher than 60% do not need charging).
Specifically designed for DJI Neo batteries, it supports PD 65W+ input and can charge up to 3 batteries simultaneously, fully charging them in approximately 42 minutes (batteries not included).
Intelligent power matching and safety guarantee: Automatically switches charging modes based on input power (simultaneous or sequential charging)
- Greater than or equal to PD65W: First charges the two batteries with lower power to the same level as the battery with higher power, then charges all three batteries simultaneously.
- Less than PD65W: Enters the charging manager mode, charging external devices in order of battery power from high to low.
Dual-function design: Charger + power bank. Converts FLIP batteries into power banks, charging external devices such as mobile phones and remote controllers through a 5V/2A USB-A interface.
Dual charging modes to extend battery life:
- Full charge mode: Quickly charges the battery to full.
- Storage mode: Charges batteries with less than 60% power to 60%-65%, suitable for long-term storage (batteries with more than 60% power are not charged).
For DJI Neo 6-port Battery Charging Hub is designed to efficiently charge up to 4 drone batteries simultaneously in approximately 45 minutes. It features 2 USB ports for charging mobile devices or remote controllers (batteries/controllers not included).
Smart & Safe Charging: Equipped with an intelligent chip for stable power delivery and comprehensive protection: over-charge, over-temperature, over-current, over-load, over-voltage, and short-circuit protection. Ensures battery longevity and safety.
LED Charging Indicators: Red light indicates charging in progress; green light shows full charge or no-load status. Easy to monitor charging status at a glance.
Durable & User-Friendly Design: Anti-slip base and heat dissipation vents enhance stability and safety during charging. Compact and portable for travel or home use.
Technical Specifications:
Input: AC 100- 240V 50/60Hz
Battery Port Output: MAX 8.5V 2A 4 (per port: 8.5V 2A)
For DJI Neo 6-port Battery Charging Hub is designed to efficiently charge up to 4 drone batteries simultaneously in approximately 45 minutes. It features 2 USB ports for charging mobile devices or remote controllers (batteries/controllers not included).
Smart & Safe Charging: Equipped with an intelligent chip for stable power delivery and comprehensive protection: over-charge, over-temperature, over-current, over-load, over-voltage, and short-circuit protection. Ensures battery longevity and safety.
LED Charging Indicators: Red light indicates charging in progress; green light shows full charge or no-load status. Easy to monitor charging status at a glance.
Durable & User-Friendly Design: Anti-slip base and heat dissipation vents enhance stability and safety during charging. Compact and portable for travel or home use.
Technical Specifications:
Input: AC 100- 240V 50/60Hz
Battery Port Output: MAX 8.5V 2A 4 (per port: 8.5V 2A)
For DJI Neo 6-port Battery Charging Hub is designed to efficiently charge up to 4 drone batteries simultaneously in approximately 45 minutes. It features 2 USB ports for charging mobile devices or remote controllers (batteries/controllers not included).
Smart & Safe Charging: Equipped with an intelligent chip for stable power delivery and comprehensive protection: over-charge, over-temperature, over-current, over-load, over-voltage, and short-circuit protection. Ensures battery longevity and safety.
LED Charging Indicators: Red light indicates charging in progress; green light shows full charge or no-load status. Easy to monitor charging status at a glance.
Durable & User-Friendly Design: Anti-slip base and heat dissipation vents enhance stability and safety during charging. Compact and portable for travel or home use.
Technical Specifications:
Input: AC 100- 240V 50/60Hz
Battery Port Output: MAX 8.5V 2A 4 (per port: 8.5V 2A)
This 3-in-1 Battery Hub & Charger is designed for DJI Mini 4 Pro, Mini 3, and Mini 3 Pro drones, compatible with both standard and long-flight batteries. It efficiently charges and manages up to 3 batteries sequentially while offering smart power preservation features.
Smart Sequential Charging: Charges up to 3 batteries automatically in order of highest to lowest charge level, prioritizing fully depleted batteries last.
Dual charging modes to extend battery life:
- Full charge mode: Quickly charges the battery to full.
- Storage mode: Charges batteries with less than 60% power to 60%-65%, suitable for long-term storage (batteries with more than 60% power are not charged).
Fast Charging Support: Compatible with PD and QC 3.0 protocols. When paired with a 35W+ PD adapter:
-Charges 3x 2453mAh batteries in ~150 mins (50 mins per battery).
-Charges 3x 3850mAh batteries in ~225 mins (75 mins per battery).
Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes.
Dual input mode: The input supports AC 100- 240V and DC 11- 14V.
Three working modes:
Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes.
Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge.
Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range.
Controlled by an intelligent chip for stable charging without damaging the battery.
No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds.
Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes.
Dual input mode: The input supports AC 100- 240V and DC 11- 14V.
Three working modes:
Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes.
Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge.
Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range.
Controlled by an intelligent chip for stable charging without damaging the battery.
No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds.
Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes.
Dual input mode: The input supports AC 100- 240V and DC 11- 14V.
Three working modes:
Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes.
Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge.
Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range.
Controlled by an intelligent chip for stable charging without damaging the battery.
No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds.
Multi-layer coating filter, high transmittance and high light to restore the true color
Using professional optical glass lens, the image is clearer
Protect your expensive lens from dust and scratches without degrading photo quality.
Material: Aluminum alloy + optical glass
Features of different filters:
UV filter: Suitable for shooting in the seaside, mountains, snowfields and open areas, etc. It can reduce the blue tone caused by ultraviolet rays. At the same time, for the camera, it can also eliminate the interference of ultraviolet rays on the CCD, which helps to improve the effect of sharpness and color reproduction.
CPL Filters: Increases color saturation, creating deep, rich scenic images. Helps to reduce the amount of light entering the lens.
ND Filter: You can get more freedom to control aperture and shutter, bring more exposure methods and creative space for photography creation, and effectively prevent overexposure. The number behind ND represents the ability of the ND mirror to block light.
Multi-layer coating filter, high transmittance and high light to restore the true color
Using professional optical glass lens, the image is clearer
Protect your expensive lens from dust and scratches without degrading photo quality.
Material: Aluminum alloy + optical glass
Features of different filters:
UV filter: Suitable for shooting in the seaside, mountains, snowfields and open areas, etc. It can reduce the blue tone caused by ultraviolet rays. At the same time, for the camera, it can also eliminate the interference of ultraviolet rays on the CCD, which helps to improve the effect of sharpness and color reproduction.
CPL Filters: Increases color saturation, creating deep, rich scenic images. Helps to reduce the amount of light entering the lens.
ND Filter: You can get more freedom to control aperture and shutter, bring more exposure methods and creative space for photography creation, and effectively prevent overexposure. The number behind ND represents the ability of the ND mirror to block light.
Multi-layer coating filter, high transmittance and high light to restore the true color
Using professional optical glass lens, the image is clearer
Protect your expensive lens from dust and scratches without degrading photo quality.
Material: Aluminum alloy + optical glass
Features of different filters:
UV filter: Suitable for shooting in the seaside, mountains, snowfields and open areas, etc. It can reduce the blue tone caused by ultraviolet rays. At the same time, for the camera, it can also eliminate the interference of ultraviolet rays on the CCD, which helps to improve the effect of sharpness and color reproduction.
CPL Filters: Increases color saturation, creating deep, rich scenic images. Helps to reduce the amount of light entering the lens.
ND Filter: You can get more freedom to control aperture and shutter, bring more exposure methods and creative space for photography creation, and effectively prevent overexposure. The number behind ND represents the ability of the ND mirror to block light.