RC Toys & Accessories

View as Grid List

Sort by

Display per page

Q170 Colorful Lights Racing Four-wheel Drive Remote Control Car (Blue)

Material: plastic
Remote control distance: 25-30m
Battery capacity: 3.7V/500mAh
Charging connector: USB charging cable
Charging time: 2-3h
Usage time: 30 minutes
Remote control battery: 2x1.5V AAA (not included with this product)
2.4G remote control signal, fast response, long distance, can compete with multiple cars

C$18.36 C$21.86

For DJI Avata ESC Traverser Drone ESC Board Accessories

Material: metal + plastic
Applicable models: for DJI Avata drone
The ESC board has the same function as the original, durable and wear-resistant, long service life
Easy to assemble and use, can directly replace the original damaged old parts
Convenient installation, exquisite craftsmanship, high quality for professional use
Weight: about 30 g

C$129.97 C$153.36

For DJI Mini 2 Drone RCSTQ Transport Thrower Drop Device

Compatible models: suitable for DJI Mini 2
Easy to control: One-button operation on the remote control, and the remote control range of the delivery device is the same as that of the drone remote control.
Simple structure: 30% lighter than old throwers, convenient size and easy to install
Built-in battery, charging time is about 50 minutes, can work continuously for 5 hours
Usage: Fishing bait, drone line release, flower throwing, advertising, lead guidance, party celebrations, marriage proposals, search and rescue.
Built-in battery capacity: 80 mAh
Remote control distance: 30-40m
Charging interface: Mirco USB

C$43.24 C$53.18

Second-hand DJI AVATA Drone Without Battery

Immersive flight experience, refreshing visual experience
Supports motion control and can be used with DJI Goggles 2 and RC Motion . The attitude of the aircraft can change following hand movements, making the operation intuitive and easy to use.
4K/60fps 155-degree ultra-wide-angle video
Super stabilized video
The body is about 410 grams, lightweight and portable
Comes with propeller protection cover, safety upgrade
1080p/100fps image transmission quality delay as low as 30 milliseconds
Two 1080p Micro-OLED screens

C$578.28 C$682.37

For DJI Mini 4 Pro STARTRC Heightened Landing Gear Training Rack

Specially designed for DJI Mini 4 Pro. It fits the Mini 4 Pro very well. The split tripod design will not block the indicator light, fill light, bottom sensor and heat dissipation hole. It will not open obstacle avoidance and can be used with the STARTRC paddle. Install and use together.
Can effectively increase the distance between the drone and the ground by 20 mm. When the Mini 4 Pro takes off or lands on uneven ground, it can reduce the impact force, allowing the drone to land smoothly, and protect the Mini 4 Pros body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the Mini 4 Pro drone ability to adapt to the ground environment during takeoff and landing.
Adopting a split quick-release design, the battery can be quickly replaced without disassembly. After disassembly, it is easy to store and carry. It can be stored in the original bag, STARTRC special bag and most bags on the market.
Lightweight materials and lightweight design, the entire landing gear weighs only 11g. The lightweight design will not add extra burden to the Mini 4 Pros flight, and it will not shake or fall off during flight.
Size: front leg 16.5 x 60 x 46mm, rear leg 24.5 x 59 x 36mm
Package List
Training Rack 1 x 1
Training Rack 2 x 1

C$13.42 C$16.51

For DJI Spark Drone Quick Release Propeller Mounting Plates CW

Propeller base bracket repair parts, used to replace worn parts.
Applicable to DJI Spark drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$7.27 C$9.10

For DJI Spark Drone Quick Release Propeller Mounting Plates CCW

Propeller base bracket repair parts, used to replace worn parts.
Applicable to DJI Spark drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$7.27 C$8.58

For DJI Mavic Mini 2 Rear Arm Pivot Pin Motor Arm

Rear shaft repair parts, used to replace worn parts.
Suitable for DJI Mavic Mini 2 drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$15.19 C$17.47

For DJI Mini 3 Pro Gimbal R-Axis Lower Bracket Drone Repair Parts

Compatible models: for DJI Mini 3 Pro
Replace damaged or unusable ones with new ones
Easy to install replacement parts
Each item is inspected and in good condition before shipment.
Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department

C$45.38 C$54.45

For DJI Mini 3 Pro RCSTQ Flight Fuselage Radiator Cooling Fan Drone Accessories (As Show)

10000 speeds, strong wind and light sound, the fan is 10,000 speeds, the wind is stronger, and the noise is reduced when running at high speed
Turbine-type fuselage radiator, heat dissipation is not hot, powerful, 5 wing-shaped noise-reducing fan blades
Silent and quiet, strong wind, does not affect flight, turbo brushless motor
UAVs are often troubled by overheating and hot hands. Install a cooling fan, and the overall temperature can drop by 5-10 degrees.
Quick disassembly and assembly, does not affect the flight, the installation of the radiator does not affect the normal flight and use of the drone, and the installation is quick, disassembly and portability

C$23.07 C$28.37

JSR For Mini 3 Pro Camera Filters, Style: Anti-light Harm

Non-destructive quick disassembly and assembly
Lightweight design, strong and durable
High definition light transmission, prevent overexposure
Using Schott optical glass, precision grinding processing, high-definition imaging
Double-sided super waterproof coating, anti-fouling and anti-scraping, effective protection

C$24.92 C$30.41

Sunnylife Foldable Spider Landing Gear for DJI Mini 3 Pro (Grey)

Non-destructive and quick installation, one-button closure, and will not scratch the machine.
It does not affect the replacement of the battery, which is convenient and quick.
Soft silicone straps, anti-mushroom head locks, tightly bundled and upgraded for protection.
Effectively increase the height by about 30mm. Greatly increases the distance between the fuselage and the ground, effectively preventing the ground debris from damaging or soiling the fuselage and sensors during take-off and landing.
Foldable tripod, portable storage, easy travel.

C$15.67 C$18.65