RC Toys & Accessories

View as Grid List

Sort by

Display per page

For DJI Spark Drone Quick Release Propeller Mounting Plates CW

Propeller base bracket repair parts, used to replace worn parts.
Applicable to DJI Spark drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$9.67 C$11.13

For DJI Spark Drone Quick Release Propeller Mounting Plates CCW

Propeller base bracket repair parts, used to replace worn parts.
Applicable to DJI Spark drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$9.67 C$11.89

For DJI Mavic Mini 2 Rear Arm Pivot Pin Motor Arm

Rear shaft repair parts, used to replace worn parts.
Suitable for DJI Mavic Mini 2 drone.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$14.25 C$17.68

For DJI Avata ESC Traverser Drone ESC Board Accessories

Material: metal + plastic
Applicable models: for DJI Avata drone
The ESC board has the same function as the original, durable and wear-resistant, long service life
Easy to assemble and use, can directly replace the original damaged old parts
Convenient installation, exquisite craftsmanship, high quality for professional use
Weight: about 30 g

C$55.69 C$67.93

For DJI Air 3 Heightened Landing Gear Body Protection Fall and Crash Proof Folding Extension Kickstand (Gray)

The effective height increase is about 34mm, and it can still land under the uneven ground environment
One-piece design, can effectively improve the aircraft in the takeoff and landing on the ground environment has a very good adaptability
It can avoid the ground debris dirtying the fuselage or damaging the gimbal during takeoff and landing
Foldable design, small and lightweight, easy to carry
Quick installation and disassembly, anti-collision protection
Material: plastic
Weight: about 29 grams
Size: about 12.5 x 8 x 1.5cm

C$15.64 C$18.30

For DJI Mini 4 Pro Landing Gear Base Gimbal Protector Folding Booster Kickstand

Can still land in uneven ground environment
One-piece design, which effectively improves the aircrafts adaptability to the ground environment during takeoff and landing, avoiding debris on the ground from dirtying the aircraft or damaging the lens
Lightweight design, does not affect the flight endurance
Precise fit, quick installation and removal, wear-resistant and durable
Foldable design, convenient storage
Material: plastic
Size: 8 x 5.6 x 1.5cm
Weight: about 10.8g

C$14.54 C$17.01

For DJI Mini 3/Mini 3 Pro 1pair Height Increase Kickstand Landing Gear Propeller Protective Cover

Reduce the wear and tear of the tripod and chassis, effectively increase the height by 25mm, prevent scratching the fuselage and gimbal, and can still take off and land under uneven ground conditions
Lightweight and stable frame, can stably carry the fuselage, almost does not affect the flight and endurance
Can be used as a mirror to the end of the bracket, handheld takeoff and landing
Triangular reinforcement design around the perimeter for more stable support
Front and rear use snap-on independent mounting, stable hook front and rear arms, stronger force, more stable
The tripod is designed to lie on the outside, 90 degrees downward shooting will not shoot the tripod
Easy to install, quick release and quick install, pay attention to differentiate the tripod serial number
Weight: about 21.8 grams

C$11.91 C$14.76

For DJI Air 3 Landing Gear Drop-Proof Height Enhancing Folding Kickstand Fuselage Paddle Protection Bracket

Effectively increase the height, in the uneven ground environment can still be landed
Integrated design, can effectively improve the aircraft in the takeoff and landing on the ground environment adaptability
Avoid ground debris dirtying the fuselage or damaging the gimbal during takeoff and landing
Foldable design, compact and lightweight, easy to carry
Quick installation and disassembly, anti-collision protection
Material: plastic
Weight: about 23 grams
Note: the product only includes the bracket, does not include the demo drone

C$15.54 C$18.50

For DJI Mini 3 Pro Night Navigation Searchlight LED Flashlight Refill Lighting Signal Light

The total weight of this night light bracket and flashlight without battery is about 60g, the drone can fly normally after installation
Adopt the screw adjustment method, the flashlight angle can be easily adjusted, so that the flight has more probing angle
The bracket is 3D printed and molded, made of plastic, with a sponge attached to the contact part of the fuselage, effectively protecting the drone from scratches, and easy to install
Using XPE-R3 lamp beads, brightness 120LM, long service life, high brightness, compact size, easy to install
Power supply: 1 AAA battery (not included)
Packing: bubble bag
Weight: about 60g
Size: 11 x 11 x 2cm

C$18.91 C$22.68

For DJI Mini 4 Pro Arm Shaft Replacement Spare Parts, Spec: Front Axis

Easy to install and easy to replace
Purpose: Replace broken or inoperable arm shafts
Material: metal
Applicable products: Applicable to DJI Mini 4 Pro
Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance department

C$9.29 C$10.69

For DJI Mavic 2 Pro/Zoom Gimbal Vibration Absorbing Board Drone Repair Parts

Gimbal shock plate for DJI Mavic 2 Pro/Zoom
Replace damaged or unusable ones with new ones.
Easy to install replacement parts
Each item is inspected and in good condition before shipment
Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department

C$25.51 C$31.63

For DJI Osmo Pocket 3 STARTRC Portable PU Storage Box Carrying Case (Grey)

Specially designed for DJI Pocket 3 camera, precise mold opening, small size but large capacity, can perfectly store all-round kit, such as: Pocket 3 camera (with protective case) + tripod + battery handle + threaded handle + microphone, etc., website The bag design can store data cables, windproof fur covers, SD cards and other small accessories;
High-quality PU leather fabric with Lycra and short velvet inside to fully protect the Pocket 3 camera from bumps and scratches;
Two-way zipper, smooth and non-stuck;
Lightweight, wear-resistant, easy to carry, and can also be stored directly in a backpack;
Portable carrying handle design, and the shoulder strap can be worn diagonally, making it easy and safe to carry the Pocket 3 camera all-in-one suit, which is very suitable for travel or home storage.
Size: 235x200x75mm
Weight: 400g

C$18.24 C$22.44