Search
CA
All Categories
    Menu Close
    WORLDWIDE SHIPPING
    WORLDWIDE SHIPPING

    fast, flexible, secure options

    ONLINE SUPPORT 24 / 7
    ONLINE SUPPORT 24 / 7

    anytime, anywhere help

    MONEY BACK GUARANTEE
    MONEY BACK GUARANTEE

    shop with confidence

    WIDE SELECTION
    WIDE SELECTION

    every day low prices

    Others

    View as Grid List
    Sort by
    Display per page
    DJI Flip Intelligent Flight Battery 3110mAh - Original Replacement - 1

    Original DJI Flip Intelligent Flight Battery 3110 MAh

    • 31-min max flight time. Be prepared and fly freely with peace of mind. Measured when flying forward at a constant speed of 6 m/s in a windless environment 20 m above sea level, in photo mode (without taking photos), and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
    • Model: BWX141-3110-7.16
    • Weight: about 83.5 grams
    • Capacity: 3110 mAh
    • Nominal voltage: 7.16v
    • Max charging voltage: 8.6v
    • Battery type: Li-ion
    • Energy: 22.3 Wh
    C$129.67 C$162.08
    DJI Neo CQT Drone Landing Scratch Cover, Upper Black Protective Accessory - 1

    For DJI Neo CQT Drone Landing Scratch Protective Cover Prevent Finger Scratch Protective Cover Accessories, Color: Upper Black

    • Made of environmentally friendly plastic material, durable, safety protection, to prevent children from touching the plane and scratching their fingers when flying and having fun
    • Lightweight design, does not aggravate the fuselage load, does not affect the flight and endurance
    • Quick disassembly, easy to use
    • Note: the upper and lower cover can not be used at the same time, the use of the same time will lead to the inlet and outlet air volume is too small to provide flight up force, the aircraft will be up and down
    • Material: plastic
    • Weight: about 2g
    • Attention: only the protective cover, not including others
    C$15.12 C$18.75
    DJI Neo CQT Drone Landing Scratch Cover, Upper Orange Accessory - 1

    For DJI Neo CQT Drone Landing Scratch Protective Cover Prevent Finger Scratch Protective Cover Accessories, Color: Upper Orange

    • Made of environmentally friendly plastic material, durable, safety protection, to prevent children from touching the plane and scratching their fingers when flying and having fun
    • Lightweight design, does not aggravate the fuselage load, does not affect the flight and endurance
    • Quick disassembly, easy to use
    • Note: the upper and lower cover can not be used at the same time, the use of the same time will lead to the inlet and outlet air volume is too small to provide flight up force, the aircraft will be up and down
    • Material: plastic
    • Weight: about 2g
    • Attention: only the protective cover, not including others
    C$13.89 C$16.80
    DJI Neo CQT Drone Landing Scratch Cover, Lower Gray Accessories - 1

    For DJI Neo CQT Drone Landing Scratch Protective Cover Prevent Finger Scratch Protective Cover Accessories, Color: Lower Gray

    • Made of environmentally friendly plastic material, durable, safety protection, to prevent children from touching the plane and scratching their fingers when flying and having fun
    • Lightweight design, does not aggravate the fuselage load, does not affect the flight and endurance
    • Quick disassembly, easy to use
    • Note: the upper and lower cover can not be used at the same time, the use of the same time will lead to the inlet and outlet air volume is too small to provide flight up force, the aircraft will be up and down
    • Material: plastic
    • Weight: about 2g
    • Attention: only the protective cover, not including others
    C$14.66 C$17.15
    DJI Neo CQT Drone Landing Scratch Cover, Lower Orange Accessory - 1

    For DJI Neo CQT Drone Landing Scratch Protective Cover Prevent Finger Scratch Protective Cover Accessories, Color: Lower Orange

    • Made of environmentally friendly plastic material, durable, safety protection, to prevent children from touching the plane and scratching their fingers when flying and having fun
    • Lightweight design, does not aggravate the fuselage load, does not affect the flight and endurance
    • Quick disassembly, easy to use
    • Note: the upper and lower cover can not be used at the same time, the use of the same time will lead to the inlet and outlet air volume is too small to provide flight up force, the aircraft will be up and down
    • Material: plastic
    • Weight: about 2g
    • Attention: only the protective cover, not including others
    C$14.06 C$16.87
    DJI Air 3S Wide-Angle Lens - Original Accessory for Enhanced Views - 1

    Original DJI Air 3S Wide-Angle Lens

    • Adopts a precise optical design that expands the FOV of the wide-angle camera to 114 degrees, offering a wider filming perspective.
    • Weight (single):: 11.8g
    • FOV: 114 degrees
    • Compatibility: DJI Air 3S
    • Packing list: wide-angle lens 1
    C$129.55 C$159.34
    DJI Air 3S ND Filter Set (ND8/32/128) - Enhance Your Aerial Shots - 1

    Original DJI Air 3S ND Filter Set (ND8/32/128)

    • Provides experienced users with precise control over shutter speed, allowing them to produce smooth footage in bright environments with lower shutter speeds.
    • Flexible use of this set can ensure clean footage, even when the shutter opens to 180 degrees with a low ISO.
    • Light transmission size:
    • -15.08 mm 13.25 mm (medium telephoto camera)
    • -17.15 mm 14.53 mm (wide-angle camera)
    • Weight: 2.84 g/piece
    • Compatibility: DJI Air 3S
    C$179.51 C$208.23
    CZI PK10 Sound Pickup Device for DJI Mavic 3 Enterprise Drone - 1

    CZI PK10 Drone Sound Pickup Device For DJI Mavic 3 Enterprise Drone

    • PK10 drone sound pickup, suitable for DJI Mavic3 Enterprise drone, specially developed for drone audio data collection mission payload.
    • Using advanced acoustic technology and acoustic algorithms, PK10 can reduce the noise entering the sound pickup as much as possible, intelligently identify and eliminate noise, and transmit high-quality audio data back. In addition to the live broadcast of aerial photography with sound, it can also be used in animal voiceprint collection, emergency audio and video transmission, and other scenarios.
    • Power supply method: Mavic 3 PSDK port
    • Weight: less than 50g
    • Size: 450 x 60 x 60mm
    • Total power: less than or equal to 3W
    • Fixing method: snap-on quick release
    • Link: PSDK
    C$399.20 C$463.08
    DJI Neo Drone BRDRC Landing Gear Support Leg Accessories - Gray - 1

    For DJI Neo Drone BRDRC Landing Gear Heightened Gear Support Leg Accessories (Gray)

    • Stable installation, without blocking the visual system, infrared sensor, etc.;
    • Increase the contact area between the landing and the ground to ensure stability;
    • Prevent the aircraft from being damaged by ground debris during takeoff and landing;
    • Does not affect normal flight after installation.
    • Main material: ABS
    • Size: 3.4 x 2.9 x 1.6cm
    • Weight: 4.2g
    C$10.61 C$13.26
    DJI Neo CQT Anti-collision Bar Height Stand (Black) - 1

    For DJI Neo CQT Anti-collision Bar Height Enhancement Stand (Black)

    • Made of 3D printed environmentally friendly plastic
    • The bumper can effectively mitigate the impact when the drone is hit, reducing or preventing gimbal damage
    • the tripod can effectively increase the height when taking off and landing to avoid scratching the fuselage and wear and tear
    • High degree of stability, increase the force area, withstand high pressure, firmly fixed not to come loose, to protect the gimbal from being attacked
    • The lightweight design of the tripod will not add extra burden to the flight of the drone, preventing wear and tear during take-off and landing
    • Easy to install and disassemble, easy to store, easy to carry around
    • Note: only the bumper and the tripod, no other included
    C$16.04 C$19.88
    DJI Neo CQT Anti-collision Bar Height Stand (Orange) - 1

    For DJI Neo CQT Anti-collision Bar Height Enhancement Stand (Orange)

    • Made of 3D printed environmentally friendly plastic
    • The bumper can effectively mitigate the impact when the drone is hit, reducing or preventing gimbal damage
    • the tripod can effectively increase the height when taking off and landing to avoid scratching the fuselage and wear and tear
    • High degree of stability, increase the force area, withstand high pressure, firmly fixed not to come loose, to protect the gimbal from being attacked
    • The lightweight design of the tripod will not add extra burden to the flight of the drone, preventing wear and tear during take-off and landing
    • Easy to install and disassemble, easy to store, easy to carry around
    • Note: only the bumper and the tripod, no other included
    C$16.04 C$18.77
    DJI Neo Goggles 3 RCSTQ Aviation Glasses Forehead Headrest Mask - 1

    For DJI Neo Goggles 3 RCSTQ Aviation Glasses Forehead Headrest Mask

    • Share the force of the users head, to prevent the user from eye fatigue due to the large force, improve the user comfort on the equipment wear
    • The gravity is dispersed, greatly reducing the pressure of the headset on the face
    • Wider forehead pillow, increasing the forehead contact area, comfortable and breathable, sweat and dirt prevention
    • 3D pla material, comfortable and thin
    • The whole row of cooling vents and slotted headband design make it more comfortable to wear
    • Memory slow rebound cotton + PU leather material, soft and comfortable, long wearing without pressure on the forehead
    • Weight: about 47.5g
    • Note: the product only mask, does not contain other items
    C$27.18 C$31.25