Home & Garden

View as Grid List

Sort by

Display per page

3 Channel RGB LED Dimmer Controller for LED Light Strip DC12-24V, Output Current: 3A

Apply to commercial and household use, can be used to control varies constant voltage LED lightings, such as LED Strip, LED Panel Light, LED spotlight, LED Down light etc.
Working Voltage DC12-DC24V
Working temperature: -20-60
Output: 3 three CMOS drain-open output
Max output current:3A
Max output power: 36W (@ DC12V), 72W (@ DC24V)
Size: 13cm x 4cm x 3cm

C$14.90 C$18.64

Single Color Dimmer Switch LED Dimmer Controller for Strip Light DC12-24V, Output Current: 8A

Apply to commercial and household use, can be used to control varies constant voltage LED lightings, such as LED Strip, LED Panel Light, LED spotlight, LED Down light etc.
Working Voltage DC12-DC24V
Working temperature: -20-60
Output: One channel
Max output current:8A
Max output power: 96W (@ DC12V) , 192W (@ DC24V)
Size: 9cm x 6.1cm x 5.5cm

C$13.36 C$15.37

Wireless Touch Key RGB LED Controller, MAX Working Distance: 30m

Frequency: 433.92MHz
Input: DC 12 / 24V, Max power: 216W
Remote control is touch key
Slide the color ring, RGB strip will show the same color
Effective receiving distance nearly 30m
Easy operation, 16 million colors changing

C$25.51 C$29.60

DC 12V-24V 8A PIR Switch Infrared Controller Motion Sensor Switch for LED Light

Voltage: DC 12V-24V
Current: <= 8A
Output: 1 channel
Sensing distance: 5-8m
Static power consumption: <1W
Material: plastic
Size: 88mm (L) x 60mm (W) x 35mm (H)

C$13.72 C$16.19

24A RGB Amplifier for LED Light, DC 12V-24V Input (Silver)

Supply Voltage: DC 12V-24V Input, 24A Output
Output: 3 channels
Connecting mode: Common anode

C$16.32 C$18.93

R888 Wall Human Motion Sensor Switch (AC110V/220V) (White)

Rated voltage: AC110V / 220V (50Hz / 60Hz)
Light Sensitivity: <=5LUX
Sensing distance: <=8m (if temperature greater than 20 Celsius degree
, the sensing distance decreases, about 4 - 5M) sensor angle: 100 degree
Load power: <100W Energy-saving lamps < 40W
Delay time: 60S
Size: 86x86x30mm
Work environment: -20 - 50 Celsius degree

C$16.29 C$19.22

G001 Wall Motion Light Sensor Switch (White)

Rated voltage: AC110V / 220V (50Hz / 60Hz)
Light Sensitivity: <=5LUX turn on, >100 - 150LUX turn off
Load power: <1000W
Size: 86x86x30mm
Work environment: -20 - 50 Celsius degree
The distance between switch and lamps: 0.5M
In low light places, when going darkness, switch turn on, when the luminosity is very light, the switch turn off.

C$12.64 C$14.79

R125 Three-Wire System Wall Human Motion Sensor Switch (AC110V/220V) (White)

Rated voltage: AC110V / 220V (50Hz / 60Hz)
Light Sensitivity: <= 3 - 8LUX
Sensing distance: <=8m (if temperature greater than 20 Celsius degree
, the sensing distance decreases, about 4 - 5M),sensor angle: 100 degree
Load power: <100W
Delay time: 60S
Size: 86x86x30mm
Work environment: -20 - 50 Celsius degree

C$14.28 C$17.14

12A RF Audio Controller for RGB LED Strip Remote Controller (Silver) (Silver)

RF Audio controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection, simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing, strobe flash and other effects of change.
**Specification:
Supply Voltage: DC 12V-24V, 12A Output
Output: 3 channels
Connecting mode: common anode
Remote distance: 20m
External dimension: L128 x W65 x H24 mm
Working Temperature: -20-60

C$15.30 C$19.12

JUNSUNMAY 5521 to USB LED Touch Inline Dimmer Switch Controller for Single Color,Length 100cm

Operation Description:
When the finger touches for the first time, the light will light up. When the hand touches again, the light will turn off
When the finger touches for a long time, the light will slowly turn on from off. When the hand leaves, the light will slowly turn off.
This LED dimmer controls 0%-100% brightness by touch-sensitive on/off controller. It is suitable for human sensor lights, soft light strips, counter lights, wall lights, glass curtain wall lights, corridor lights, some LED lighting devices, etc.
Plug and Play: No cutting and soldering required, easy to install and simple to use.Connect Single Color LED Strip light to the DC power adapter, to adjust brightness by long press, and switch on/off by short press in a cycling pattern.
With Memory Functionrestart will remember the last adjustment effect
Easy to use: small size, easy to carry Simple and convenient wiring, plug and play.

C$11.54 C$13.84

JUNSUNMAY 5525 to USB LED Touch Inline Dimmer Switch Controller for Single Color,Length 100cm

Operation Description:
When the finger touches for the first time, the light will light up. When the hand touches again, the light will turn off
When the finger touches for a long time, the light will slowly turn on from off. When the hand leaves, the light will slowly turn off.
This LED dimmer controls 0%-100% brightness by touch-sensitive on/off controller. It is suitable for human sensor lights, soft light strips, counter lights, wall lights, glass curtain wall lights, corridor lights, some LED lighting devices, etc.
Plug and Play: No cutting and soldering required, easy to install and simple to use.Connect Single Color LED Strip light to the DC power adapter, to adjust brightness by long press, and switch on/off by short press in a cycling pattern.
With Memory Functionrestart will remember the last adjustment effect
Easy to use: small size, easy to carry Simple and convenient wiring, plug and play.

C$11.54 C$13.73

JUNSUNMAY 35135 to USB LED Touch Inline Dimmer Switch Controller for Single Color,Length 100cm

Operation Description:
When the finger touches for the first time, the light will light up. When the hand touches again, the light will turn off
When the finger touches for a long time, the light will slowly turn on from off. When the hand leaves, the light will slowly turn off.
This LED dimmer controls 0%-100% brightness by touch-sensitive on/off controller. It is suitable for human sensor lights, soft light strips, counter lights, wall lights, glass curtain wall lights, corridor lights, some LED lighting devices, etc.
Plug and Play: No cutting and soldering required, easy to install and simple to use.Connect Single Color LED Strip light to the DC power adapter, to adjust brightness by long press, and switch on/off by short press in a cycling pattern.
With Memory Functionrestart will remember the last adjustment effect
Easy to use: small size, easy to carry Simple and convenient wiring, plug and play.