Consumer Electronics

View as Grid List

Sort by

Display per page

Compatible Tuya ZigBee Smart Light Switch With Radar Motion Sensor No Capacitor Required 2-Gang

Zigbee wall switch with radar motion sensor: It can turn on/off the light according to the motion status, such as turning on the light switch when human motion is detected.
Wireless mode: Zigbee 3.0 (Tuya zigbee gateway is required, not included in the package)
Single live wire version: No need to rewire. No neutral wire required. Remove the old switch and install it directly to use.
No capacitor required: No capacitor required, better user experience, no current noise.
Full coverage panel: Excellent tactile material ensures its excellent visual experience, breaking the stiffness of traditional mechanical buttons, feels like an excellent mouse, and the click sound is crisp
Magnetic latching relay: Lower power consumption, less heat generation, higher reliability, and safer to use.
App remote control: Control the switch anytime, anywhere through the mobile app.
Set timing and countdown: Turn the connected device on and off at the specified time.

C$25.95 C$32.44

Compatible Tuya ZigBee Smart Vibration Tilt Sensor Real Time Shock Alarm Security Protection

Vibration detection sensor: Enable the vibration detection function in the Tuya Smart App. When the device detects vibration, the APP alarm notification function will be triggered to truly monitor your home safety.
Tilt detection sensor: Enable the tilt detection function in the Tuya App. When the sensor is tilted, the App alarm notification function will be triggered.
Sensitivity setting: You can set the sensitivity in the App as needed, ranging from low to high; support viewing history to monitor your home more accurately.
Real-time remote monitoring: No matter when and where, once the vibration sensor detects vibration or movement, you will receive a push notification on your smartphone in the Tuya Smart Life App as real-time monitoring.
Smart linkage: The vibration sensor can be used with other Tuya products to achieve smart linkage for the whole house (smart scenes need to be created)
Working voltage: DC 3V
Wireless connection: ZigBee 3.0 (need to use Zigbee hub)
Standby current: less than or equal to 10uA

C$18.47 C$21.42

Waveshare 12V/4A 1.2m Length Cable DC Jack Power Supply Adapter (EU Plug)

Plug type: US Plug, EU Plug, UK Plug
Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack
Protection circuit: short circuit/overvoltage/overcurrent protection
Input parameters: AC100V~240V 50Hz/60Hz, no-load low standby power consumption
Output parameters: DC12V4A, low ripple
Safety certification: UL/CUL, CE, TUV, SAA, GS
Product size: about 89.4 x 47.4 x 23.5mm
Weight: about 200g

C$22.95 C$28.23

Waveshare 9V/5A 1.2m Length Cable DC Jack Power Supply Adapter (US Plug)

Plug type: US Plug, EU Plug, UK Plug
Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack
Protection circuit: short circuit/overvoltage/overcurrent protection
Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption
Output parameters: DC9V 5A, low ripple
Safety certification: UL/CUL, CE, TUV, SAA, GS
Product size: about 89.4 x 47.4 x 23.5mm
Weight: about 220g

C$22.96 C$27.09

Waveshare 9V/5A 1.2m Length Cable DC Jack Power Supply Adapter (EU Plug)

Plug type: US Plug, EU Plug, UK Plug
Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack
Protection circuit: short circuit/overvoltage/overcurrent protection
Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption
Output parameters: DC9V 5A, low ripple
Safety certification: UL/CUL, CE, TUV, SAA, GS
Product size: about 89.4 x 47.4 x 23.5mm
Weight: about 220g

C$22.96 C$28.01

Waveshare 9V/5A 1.2m Length Cable DC Jack Power Supply Adapter (UK Plug)

Plug type: US Plug, EU Plug, UK Plug
Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack
Protection circuit: short circuit/overvoltage/overcurrent protection
Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption
Output parameters: DC9V 5A, low ripple
Safety certification: UL/CUL, CE, TUV, SAA, GS
Product size: about 89.4 x 47.4 x 23.5mm
Weight: about 220g

C$22.96 C$27.79

20A 12V 24V Lithium Lead Acid Solar Charge Controller PWM PV Controller With LCD Display

Supports battery type (factory setting defaults to B2):
B1=Lead-acid battery 12V/24V (automatic recognition)
B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)
Safe use recommendations:
This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type

C$14.28 C$17.56

30A 12V 24V Lithium Lead Acid Solar Charge Controller PWM PV Controller With LCD Display

Supports battery type (factory setting defaults to B2):
B1=Lead-acid battery 12V/24V (automatic recognition)
B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)
Safe use recommendations:
This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type

C$13.52 C$15.82

Waveshare 24V/2A 1.2m Length Cable DC Jack Power Supply Adapter (UK Plug)

Plug type: US Plug, EU Plug, UK Plug
Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack
Protection circuit: short circuit/overvoltage/overcurrent protection
Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption
Output parameters: DC24V 2A, low ripple
Safety certification: UL/CUL, CE, TUV, SAA, GS
Product size: about 89.4 x 47.4 x 23.5mm
Weight: about 180g

C$22.95 C$28.69

20A 12V 24V Setup-Free Color Screen Luminous Display Solar Controller PV Solar Charge Controller

Safe use recommendations:
This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment
This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be
This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface
Technical parameters:
System voltage: 12V/24V automatic adaptation

C$16.19 C$20.24

30A 12V 24V Setup-Free Color Screen Luminous Display Solar Controller PV Solar Charge Controller

Safe use recommendations:
This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment
This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be
This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface
Technical parameters:
System voltage: 12V/24V automatic adaptation

C$15.64 C$18.61

Waveshare Industrial Dual Ethernet Ports 8-ch Relay Module (C), PoE Power Supply (30544)

Dual Ethernet port design, support communication and PoE power supply cascade
With flash-on and flash-off functions, the relay can be controlled by command to automatically close after being turned on for a period of time
Support DC7V-36V wide voltage power supply, support PoE Ethernet power supply
Support control of relays through MQTT protocol, and provide Alibaba Cloud MQTT application routines
Onboard optocoupler isolation to avoid interference from relay high-voltage circuits
Adopt special relay driver chip with built-in freewheeling diode protection, with stronger and more stable driving ability
The switch input has bidirectional optocoupler isolation, supports passive and active switch input, built-in de-jitter algorithm, and the relay supports switch input linkage mode or flip mode control
Onboard anti-reverse connection circuit to avoid reverse connection of positive and negative poles and burnout of the circuit

C$109.01 C$126.45