Consumer Electronics

View as Grid List

Sort by

Display per page

Waveshare L76B GNSS Module for Raspberry Pi Pico, Support GPS, BDS, QZSS

The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it is easy to use global navigating function.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Multi satellite systems support: GPS, BDS, and QZSS
Easy, self track prediction technology, help quick positioning
AlwaysLocate, intelligent controller of periodic mode for power saving
Support D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
UART communication baudrate: 4800~115200bps (9600bps by default)
Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts

C$29.40 C$36.75

Waveshare 5 inch Slimmed-down Version 800 x 480 Toughened Glass Panel Capacitive Touch Screen LCD (H)

Device & System Support
Raspberry Pi
Support Raspbian, 5-points touch, driver free
Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Support Retropie, driver free
Support all versions of Raspberry Pi
PC
Support Windows 10 / 8.1 / 8 / 7, 5-points touch, driver

C$72.08 C$83.62

Waveshare SGP40 VOC Volatile Organic Compounds Gas Sensor, I2C Bus

The SGP40 VOC Sensor is a digital VOC (Volatile Organic Compounds) sensor module which incorporates SGP40, designed for air quality monitoring. It can be used to measure fire coal, natural gas emissions, cigarette/cooking smoke, and emissions from constructing activity, decoration material, furnitures, home appliances, then generate digital signals for triggering air treatment devices. The SGP40 VOC Sensor is small in size for easy integration into air treatment devices and air quality monitors, definitely an ideal choice for learning air quality monitoring.
Incorporates SGP40, for measuring 0 ~ 1000 ppm of ethanol equivalents
Features humidity-compensation and low-heat-dissipation, providing outstanding performance on sorts of environments
Digital I2C output, less interference
Onboard voltage translator, compatible with 3.3V/5V operating voltage
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Sensor: SGP40
Measurement range: 0~1000 ppm of ethanol equivalents

C$25.03 C$31.04

Waveshare 7.5 inch 800x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.

C$86.73 C$106.68

Waveshare 5.83 inch 648x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V
Display color: Red, black, white
Resolution: 648x480 pixels

C$74.85 C$86.08

Waveshare 2.9 inch 296 x 128 Pixel Black/White Flexible E-Paper E-Ink Display Module for Raspberry Pi Pico, SPI Interface

Flexible e-Paper panel, the display section is bendable (DONOT bend the FPC section)
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V
Display color: Black, white

C$36.75 C$42.27

Waveshare 3.5 inch IPS Screen Overall Evaluation Board for Raspberry Pi Pico, Misc Onboard Components For Easily Evaluating The RP2040

The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring. It is an ideal choice for user to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
3.5 inch resistive touch screen, 65K colorful, bringing clear and vivid display effect
Standard 3.5mm audio jack, for headphone or other audio peripherals
Micro SD card slot through the SDIO interface, faster access speed than SPI interface
Integrates battery header and recharge circuit, allows it keep running without wired power supply
Other rich resources like buzzer, photoresistor, and RGB LED...
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

C$61.34 C$74.83

Waveshare 3.7 inch 480x280 Pixel E-Paper E-Ink Display Module for Raspberry Pi Pico, 4 Grayscale, SPI Interface

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V/5V
Display color: Black, white
Resolution: 480x280 pixels

C$43.16 C$50.06

Waveshare 7.5 inch 800x480 pixel Black White E-Paper E-Ink Display Module for Raspberry Pi Pico, SPI Interface

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V
Display color: Black, white
Resolution: 800x480 pixels

C$86.73 C$105.80

Waveshare 2.13 inch 212 x 104 Pixel Black/White Flexible E-Paper E-Ink Display Module for Raspberry Pi Pico, SPI Interface

Flexible e-Paper panel, the display section is bendable (DONOT bend the FPC section)
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V
Display color: Black, white

C$34.53 C$40.40

Waveshare 5.83 inch 648x480 Pixel Black White E-Paper E-Ink Display Module for Raspberry Pi Pico, SPI Interface

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
2x user buttons and 1x reset button for easy interacting
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage: 3.3V
Display color: Black, white
Resolution: 648x480 pixels

C$74.85 C$89.82

Waveshare SIM8200EA-M2 5G Snapdragon X55 Multi Mode Multi Band 5G/4G/3G Module Expand Board for Jetson Nano, EU Plug

This 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8200EA-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL).
The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required.
Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano
Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc.
USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc.
SIM card slot, supports 1.8V / 3V SIM card
2x LED indicators, easy to monitor the working status
AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set

C$448.61 C$551.80