Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
DIY Parts & Components
4-20mA 0-10V Signal Generator Adjustable Voltage Current Simulator (Without Battery)
- Output range: 0-20mA, 4-20mA, 0-22mA, 0-1V, 0-5V, 0-10V, 0-2.5V, 0-3.3V, -5V to 5V, 1-5V, 2- 10V, etc. can be switched and adjustable.
- Display mode: actual current/voltage signal value display, 0.0-100%, 0.0-50.0(Hz), switchable.
- The user can set 9 fast signal output points, which is more convenient for debugging.
- Support 24V working power for terminal blocks and 5V working power for USB ports, which can be used in indoor or outdoor industrial sites
- The output accuracy can be calibrated by the user, the output accuracy is 0.01V, 0.01mA, and the LED display output signal value is accurate.
- The adjustment steps can be fine-tuned or coarse-tuned, and can be switched.
- The signal generator has short circuit protection circuit and reverse polarity protection circuit.
- The default output range is 0-10V, 0-20mA, and the user can adjust it to output -10V to -10V, 4-20mA and other output ranges.
C$30.49 C$35.06
Waveshare 23949 USB To RS485/422 Isolated Converter, FT232RL And SP485EEN
- Onboard original FT232RL and SP485EEN chips; fast communication speed, stable and reliable, better compatibility
- On-board integrated power isolation, providing stable isolation voltage, no additional power supply is required at the isolation end
- Onboard integrated digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppressing surge voltage and transient peak voltage in the circuit, lightning protection and anti-static
- On-board self-recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection, and improve impact resistance
- Onboard 15KV ESD isolation protection and 600W lightning surge protection
- The RS485/RS422 interface has a 120R terminal resistor on board, which is enabled by default and can be configured by jumpers
- 3 LEDs to indicate power and transceiver status
C$31.82 C$39.45
UNO R3 CH340G Improved Version Development Board with 50cm USB Cable
- Type:Voltage Regulator
- Packaging Electrostatic bag
- It use the same as official R3 board
- Use: Instrument
- Power supply voltage: 5v~9v
- Output voltage: 5V DC voltage output and 3.3V DC voltage output
- Plug in the development board, the driver will be installed automatically
- Select the board in die
C$11.79 C$14.62
2123HSL 12038 DP200A 220V Brushless Cooling Fan
- Color: Black
- Material: PA66
- Frequency: 50/60HZ
- Current: 0.14A
- Voltage: 220-240V
- Suitable for DIY project
- Dimensions: 12.0 cm x 12.0 cm x 3.8 cm
- Weight: 377g
C$9.80 C$11.27
Waveshare 26369 1.28-Inch Round LCD Screen RP2040 MCU Board without Touch
- Non-touch version features:
- RP2040 microcontroller chip designed by Raspberry Pi
- Equipped with dual-core ARM Cortex M0+ processor, running frequency up to 133MHz flexible clock
- Built-in 264KB SRAM and 2MB onboard Flash
- Adopt Type-C interface, no need to worry about forward and reverse insertion
- Onboard 1.28-inch 240240 resolution, 65K color IPS LCD display, can clearly display color pictures
- Onboard lithium battery charging and discharging interface, which is conducive to mobile scene use
- The upper shell is made of CNC metal material, and the back is equipped with acrylic frosted bottom plate
C$48.32 C$57.02
Waveshare 26369 1.28-Inch Round LCD Screen RP2040 MCU Board with Touch
- Touch version features:
- RP2040 microcontroller chip designed with Raspberry Pi
- Equipped with dual-core ARM Cortex MO0+ processor, running at up to 133MHz flexible clock
- Built-in 264KB SRAM and 16GB onboard Flash
- Adopts Type-C interface, no need to worry about whether to insert it forward or backward
- Onboard 1.28-inch capacitive touch LCD screen, 240240 resolution, 65K color
- Onboard lithium battery charging and discharging interface, which is conducive to mobile scene use
- The upper shell is made of CNC metal material, and the back is equipped with an acrylic frosted bottom plate
C$48.25 C$55.49
Waveshare JetBot AI Kit Accessories, Add-ons for Jetson Nano to Build JetBot, US Plug
- Overview
- Smart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.
- Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.
- If you have got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.
- Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.
- Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.
- Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.
- Onboard TB6612FNG dual H-bridge motor driver.
C$140.62 C$161.72
Waveshare MG996R Servo, Metal Gear, High Torque
- Product: MG996R Servo
- Torque: 9kg/cm(4.8V), 11kg/cm(6V)
- Speed: 0.19s/60(4.8V), 0.18s/60(6V)
- Rotate angle: 180
- Operating voltage: 4.8 ~ 6V
- Gear: metal
- Dead band: 5us
- Weight: 55g
C$13.65 C$16.11
Waveshare MG90S Micro Servo, Metal Gear
- Product: MG90S Servo
- Torque: 2.0kg/cm(4.8V), 2.8kg/cm(6V)
- Speed: 0.11s/60(4.8V), 0.09s/60(6V)
- Rotate angle: 180
- Operating voltage: 4.8 ~ 6V
- Gear: metal
- Dead band: 5us
- Weight: 12.2g
C$12.60 C$15.37
Waveshare WAVE ROVER Flexible Expandable 4WD Mobile Robot Chassis, Onboard ESP32 Module (EU Plug)
- WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.
- Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.
- Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.
- Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.
- Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.
- WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.
- Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.
- Tire material: nylon wheels, rubber tires
C$154.25 C$178.93
Yahboom USB3.0 HUB Expansion Board ROS Robot Expansion Dock (6000301226)
- Chip model: VL817
- Transmission speed: 5Gbps (theoretical)
- Input interface: USB-A
- Data cable length: 30cm
- Output interface: 4xUSB3.0
- Interface compatibility: USB3.0 and backward compatible with USB2.0 and USB1.1
- Supporting equipment: ROS robot/car, Raspberry Pi/Rising Sun RDK/Jetson series motherboards, PC computer, industrial computer
- Compatible systems: Win7/8/10, Linux, MacOS, Ubuntu
C$34.49 C$42.08
Yahboom 8-bit Full-color RGB Light Ring Module Microbit Raspberry Pi Pico Development Board
- VCC: power supply interface, can be connected to 3.3V, 5V
- GND: ground
- RGB: signal input
- NC: empty interface, no connection required
- Working voltage: 3.3V/5V
- Module size: 28.7x30mm
- RGB lamp model: TX1812C
- Interface mode: crocodile clip interface, DuPont line interface, PH2.0 cable interface
C$9.67 C$11.31
NEED HELP?
Payment options
