Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
DIY Parts & Components
Waveshare General 1.5 inch 128x128 16-bit High Color RGB OLED Display Module
- 1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interface
- Overview
- This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
- 128x128 high resolution, 65K colors, clearly displays colorful images
- Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
- Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- Driver: SSD1351
- Interface: 4-wire SPI, 3-wire SPI
C$31.63 C$38.92
Waveshare 4 Port USB HUB HAT for Raspberry Pi
- Overview
- This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, whats more, it features USB to UART converter for easy serial communication.
- It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W.
- USB HUB HAT Features
- 4 USB Ports, compatible with USB2.0/1.1
- Onboard USB to UART, convenient for Raspberry Pi serial debugging
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
- What is on the USB HUB HAT
C$19.71 C$23.66
Waveshare USB3300 USB HS Board
- Overview
- The USB3300 USB HS Board is an accessory board which acts as the USB high-speed external PHY device for ULPI interface, features the USB3300, MIC2075-1BM onboard.
- USB3300, MIC2075-1BM, ULPI interface
C$21.90 C$25.41
Waveshare PCF8563 RTC Board
- Overview
- 1. The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.
- The PCF8563 RTC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.
- Features
- PCF8563, I2C pinheader, I2C connector, 3.3V battery included
C$12.60 C$15.37
Waveshare Infrared LED Board (B), Wide Field of View
- Features
- 1. 3W high-power 850 infrared LED
- Onboard photoresistor, the ambient light detector
- Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
- Allows adding night vision function to cameras which feature embedded infrared filter :
- a) 100 degree field of view, two pieces of LED is required to get wider field of view
- b) Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)
- How to Use
C$14.47 C$17.94
Waveshare PL2303 USB To UART (TTL) Communication Module V2
- Adopt PL2303GS new version device
- Support windows XP/7/8/10/11/...
- 3x VCCIO power mode via jumper setting:
- VCCIO - 5V: 5V output
- VCCIO - 3.3V: 3.3V output
- Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V)
- 3x LED indicators: TXD, RXD, PWR
- Package List
C$12.60 C$15.12
Waveshare Metal Case Gigabit PoE Splitter, 5V 2.5A Type-C Out
- Incorporates original chip Si3404, high-efficiency, high-safety, stable-performance
- 10/100/1000Mbps auto-negotiation Ethernet port
- 802.3af/at-compliant PoE (Power over Ethernet) standard
- Isolated SMPS (Switching Mode Power Supply), effectively protecting the powered device
- 5V DC output, suitable for powering Raspberry Pi and other small-scale network devices
- Black dull-polish metal case, sturdy and rugged, higher protection level, better heat dissipation
- Power Supply: Support 1/2(+); 3/6(-); 4/5(+); 7/8(-) powering
- POE input voltage: 37V ~ 57V
C$29.89 C$34.67
Waveshare Binocular Camera Base Board with Interface Expander for Raspberry Pi Compute Module 4
- Camera Base Board
- CM4 socket: Suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45
- USB: USB 2.0 x 1
- FFC connector:
- HDMI-compatible & PCIe & USB FFC connector x 1
- GPIO FFC connector x 1
- Dual-lens camera
C$103.03 C$128.80
Waveshare High Conversion Efficiency 18V 10W Solar Panel
- Solar cell type: Polysilicon
- Power: 10 Wp
- Output power tolerance: +/-3%
- Conversion efficiency: Greater than 20%
- Operating voltage: 17.6V
- Operating current: 0.57A
- Open circuit voltage: 21.6V
- Short circuit current: 0.61A
C$22.68 C$26.54
Waveshare Solar Power Manager, Embedded 10000mAh Li-Po Battery, Support 6V~24V Solar Panels (Black)
- The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).
- The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects.
- Support MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Flexible battery recharging: from solar panel or USB TYPE-C power adapter
- Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
- Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency
- Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
- PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery
C$42.08 C$52.60
WAVESHARE 65K Colors 160 x 80 Pixel 0.96 inch LCD Display Module for Raspberry Pi Pico, SPI
- 160x80 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
- SPI interface, requires minimal IO pins
- 1x joystick and 2x user buttons for easy interacting
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
- Operating voltage: 2.6 ~ 5.5V
- Resolution: 160x80 pixels
- Display color: 65K RGB
- Communication interface: 4-wire SPI
C$16.49 C$19.63
Waveshare ZED-F9P GPS-RTK HAT Centimeter Level Accuracy Multi-Band RTK Differential GPS Module for Raspberry Pi
- This is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming.
- By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate
- Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy
- Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption
- Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
- A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity
C$516.80 C$645.99
NEED HELP?
Payment options
