Personal menu

WORLDWIDE SHIPPING

fast, flexible, secure options

ONLINE SUPPORT 24 / 7

anytime, anywhere help

MONEY BACK GUARANTEE

shop with confidence

WIDE SELECTION

every day low prices

Diagnostic, Test & Measurement Tools

View as Grid List

Sort by

Display per page

Battery Internal Resistance Tester Lead-Acid Alkaline Lithium Battery Tester, Model: IR500

Voltage: 0.00V~120V
Internal resistance measurement: 0.000m~500
Input voltage: DC 120V (regardless of polarity), AC input is not allowed
Measurement current: 50mA~50uAAC
Measurement speed: 3 times/second
Measurement signal frequency: 1KHz
Screen and size: IR500 55x57mmTN black and white screen; IR 502 55x57mmTN color screen
Power supply: 3.7V 1200mAh lithium battery

C$58.39 C$67.14

ANENG AN8009 NVC Digital Display Multimeter, Specification: Standard with Cable (Blue)

Material: ABS
Battery type: AAA battery x 2 (not included)
AC voltage: 750V
DC voltage: 1000V
Alternating current: 10A
DC current: 10A
Resistance: 10
Capacitance: 9.999mF

C$38.11 C$45.35

Wintact WT8812 Compound Gas Monitor Detection Alarm

Gas measurement: The sensor warms up when the countdown is started. The refresh rate is 1HZ. Do not charge during the measurement of combustible gas, otherwise it may explode.
High/low alarm: 4 default high/low alarms, 4 types of alarms, and the alarm sound can be turned off.
Data recording: 1000 pieces of data can be recorded. The default interval of data recording is 5 seconds, which can be set in inL of the setting mode. When the interval is set to 0 seconds, the data logging function fails. The delete operation will delete all recorded data.
Temperature display: set the unit to Celsius or Fahrenheit, the default unit is Celsius
Automatic shutdown: automatic shutdown without operation within 30 minutes. This feature is turned on by default.
Battery capacity: It is forbidden to start the unit to avoid measurement errors or explosion. If the battery is low, it may turn off automatically. Charging time: about 4 hours. Discharge time: about 8 hours.
Zero point calibration: It is recommended to calibrate the device at zero point or zero offset every month to ensure the high accuracy of the measurement (please ensure that the battery power is above 2bar) calibration, and place it in the air for a period of time after powering on. Make sure that the device body temperature is slightly higher than the ambient temperature.
Temperature compensation: the measured data is compensated within the range of -20 to 50 degrees Celsius

C$92.96 C$106.91

SNDWAY SW582 Handheld Digital Illuminance Meter High-Precision Digital Light Meter (SW582)

Automatically switch the range, the probe can be rotated, with high-definition backlight, with data lock
High sensitivity sensor, portable measurement
Material: Plastic + Electronics
Resolution: 1lux
Working voltage: 4.5v
Measuring range: 0-199 thousand lux
Power supply mode: 3 AAA batteries (self-prepared)
Product accessories: Host, manual, warranty card certificate, color box packaging

C$40.43 C$46.50

BSIDE U1 AC/DC Clamp Meter Electric Pen Current Digital Multimeter

Three-in-one function, electric pen + ammeter + multimeter, strong practicality.
Beautiful, portable, high precision, fast testing, more reliable.
Color LCD display, LED flashlight design, enhanced reading experience.
With full-range overload protection, automatic measurement at power on, and intelligent burn prevention.
Automatic mode: can automatically identify AC voltage, DC voltage, resistance, and on/off.
DC voltage: 0-610V
AC voltage: 0-610V
DC current: 1-100A

C$67.27 C$80.05

BSIDE U0 AC/DC Clamp Meter Electric Pen Current Digital Multimeter

Three-in-one function, electric pen + ammeter + multimeter, strong practicality.
Beautiful, portable, high precision, fast testing, more reliable.
Color LCD display, LED flashlight design, enhanced reading experience.
With full-range overload protection, automatic measurement at power on, and intelligent burn prevention.
Automatic mode: can automatically identify AC voltage, DC voltage, resistance, and on/off.
DC voltage: 0.800V-610V
AC voltage: 0.800V-610V
DC current: 1-100A

C$46.57 C$56.80

BENETECH GT5101 LCD Display Differential Pressure Meter, Specification:100KPa

Charging method: 5V/1A mobile phone power adapter
Charging time: about 1.5h
Working time: about 13 hours
Standby time: about 8 months, automatic shutdown when voltage is lower than 2.9V
Working current: 90mA
Power: 400mW
Working temperature: -10 degrees to 60 degrees
LCD interface display, data recording, battery power display

C$69.67 C$85.69

BENETECH GT8915 Digital LCD Screen Anemometer

Power supply: 3.7V/1000mAh
Operating temperature: 0 degrees Celsius to 45 degrees Celsius
Air volume measurement range: 0-999900CMM
Wind speed measurement range: 0-8800 feet/minute
Operating humidity: 40-85%RH
Storage humidity: 10%-90%
The handle can be stretched for long-distance measurement, and the length can be stretched to 533mm
Support five wind speed unit selections, manual/automatic shutdown

C$48.42 C$56.65

BSIDE GX1 Integrated Environment Monitor Temperature Humidity Altitude Noise Detection

Temperature range: -20~60 degrees Celsius / -4~140 degrees Fahrenheit
Humidity range: 10~99%RH
Illumination: 0~199999 LUX / 0-199.99 FC
Altitude: -700~9000m
Air pressure: 300~1200hpa
Noise: 30~130dB
Display: LCD
Power supply: built-in 3.7V 400mAh lithium battery

C$49.82 C$59.28

BSIDE G2 Portable Air Quality Detector Indoor Formaldehyde Tester

HCHO detection range: 0.017-1.999mg/m3
HCHO response sensitivity: 0.20mg/m3
TVOC detection range: 0.096-9.999mg/m3
TVOC response sensitivity: 0.100mg/m3
Response time: 2 seconds
Warm-up time: 200 seconds
Sensor: air detection sensor
Sampling rate: 1 second

C$27.21 C$32.65

BSIDE A50 Infrared Temperature Test Digital Multimeter

DC voltage range: 0V-620V
AC voltage range: 0V-620V
DC current range: 1A-610mA
AC current range: 1A-610mA
Resistance range: 0-600M
Capacitance range: 1nF-60mF
Frequency range: 1.0Hz-9.999MHz
Duty cycle: 10.0%-95.0%

C$50.40 C$57.96

BENETECH GT313D LCD Display Infrared Thermometer, Battery Not Included

Measuring range: -50 degrees Celsius to 950 degrees Celsius (-58 degrees Fahrenheit to 1742 degrees Fahrenheit)
Distance ratio: 12:1
Emissivity: 0.95 preset
This infrared thermometer is used to measure the temperature of the surface of an object, suitable for a variety of high-temperature, dangerous or difficult-to-reach objects, without contact
This unit consists of optical components, temperature sensor signal amplifier, processing circuit and LCD display. The optical device collects the infrared energy emitted by the object and focuses it on the sensor. The sensor then converts the energy into an electrical signal. The signal is digitally displayed on the LCD display after the signal amplification processing circuit
1.5V AAAx2 batteries (not included)

C$23.32 C$27.74

Refine