The 0-10V/0-22mA voltage and current source signal generator is the most commonly used electrical test instrument by electrical engineering technicians during the installation, debugging, overhaul and maintenance of on-site electrical equipment. It is also used in scientific research, teaching experiments and other applications. It is also widely used in the field of
In smart mode, the voltmeter automatically measures voltage, resistance and continuity. It can identify the measurement content and select the resolution range, making the measurement more convenient and faster.
Easy to use, USB direct plug-in power supply, no need to manually replace the battery, more convenient
Micro USB universal interface, can be connected to power bank/charger/computer USB port, etc.
Plug-in terminals for safe and convenient wiring
4-digit high-definition digital tube, uniform and adjustable display brightness (1-8 levels of brightness)
Set a voltage and current value, click the encoder to save, and restart to directly display the saved value. There is no need to adjust parameters every time you turn on the machine. It is highly practical.
The small handheld signal source is easy to carry and a powerful tool for on-site debugging.
Covers a variety of measurement modes to easily meet the measurement needs of various scenarios: single measurement, multiple measurements, area measurement, volume measurement, primary Pythagorean, secondary Pythagorean, front and rear benchmarks, unit switching
High-precision laser ranging, intelligent algorithm, distance measurement is completed instantly with an accuracy of 0.002m, and the measurement is fast and accurate
Sensitive sensor with a response time of 0.5 seconds, no contact required. It can measure noise levels in any situation and quickly display accurate measurement results.
Large and clear LCD backlit display, convenient reading at night. Low radiation, reduce damage to eyes.
Measuring range 30-130dBA; +/-1.5dB accuracy, 0.1dB resolution.
Data hold function; maximum/minimum sound level measurement; automatic shutdown after 15 minutes, and also has an alarm function when the voice level reaches 130dB.
Suitable for factories, offices, homes, schools and construction sites.
There are 4 different connectors for contact measurement.
Non-contact and contact tests can be performed according to your needs.
With positioning technology.
High resolution and 5-digit backlit LCD display.
A wide range of measurement types, you can test rotation speed (RPM), reverse rotation, frequency (Hz), speed (meters/minute, inches/minute, feet/minute, yards/minute) and length (meters, inches, feet, yards).