This M.2 NVMe/SATA Tool-Free External Enclosure transforms your M.2 SSD into a portable high-performance storage device. Supports dual-protocol transmission for broad compatibility and ultra-fast read/write speeds.
Supports M.2 NVMe PCIe (up to 10Gbps) and M.2 SATA SSDs (up to 6Gbps).
Not compatible with B-key SSDs; M.2 SATA requires B+M Key.
Compatible with 2230/2242/2260/2280-sized SSDs.
USB 3.1 Gen2 Type-C interface enables ultra-fast speeds of 10Gbps (NVMe) and 6Gbps (SATA).
18MB/s maximum read speed, 10MB/s maximum write speed, high-speed transmission experience.
Weight: 1.5g.
Size: 11x15x1.1mm.
Capacity: 16GB.
Compatible with smartphones, tablets, GPS, cameras and other devices that support TF slots. (The camera needs to be plugged into the adapter operation)
18MB/s maximum read speed, 10MB/s maximum write speed, high-speed transmission experience.
Weight: 1.5g.
Size: 11x15x1.1mm.
Capacity: 64GB.
Compatible with smartphones, tablets, GPS, cameras and other devices that support TF slots. (The camera needs to be plugged into the adapter operation)
USB specification: USB3.0 standard, backward compatible with USB2.0, theoretically the transfer rate can reach 5.0Gbps
Support SATA3.0, backward compatible with SATA2.0
Support USB hot plug, plug and play, no need to install driver
Support UASP acceleration
Support hard disk thickness: 7.0mm and 9.5mm, 2.5-inch serial port (SATA 7+15PIN) hard disk, 12.5mm and 15mm hard disks are not supported
Support 3 minutes smart sleep (power saving mode), do not operate the disk after 3 minutes of sleep, automatically wake up when the disk is reopened or data is transferred (that is, the hard disk starts to rotate)
SATA3 6Gb/s high-speed interface and CMOS low-power technology are adopted to effectively reduce the power consumption
It supports optimization commands such as NCQ/TEIM/SMATR, which not only enhances the hard disk writing performance, but also reduces the probability of low loss and slows down performance degradation to effectively extend the service life of the hard disk
Standard SATA interface and 2.5 inch design allow it to directly replace the original 2.5 inch mechanical disk of laptops and computers
SATA3 6Gb/s high-speed interface and CMOS low-power technology are adopted to effectively reduce the power consumption
It supports optimization commands such as NCQ/TEIM/SMATR, which not only enhances the hard disk writing performance, but also reduces the probability of low loss and slows down performance degradation to effectively extend the service life of the hard disk
Standard SATA interface and 2.5 inch design allow it to directly replace the original 2.5 inch mechanical disk of laptops and computers