Cell Phones, Tablet PCs & Smartwear

View as Grid List

Sort by

Display per page

FANTASY Wireless Charger & Wireless Charging Receiver, For Galaxy Note Edge/N915V/N915P/N915T/N915A (White)

Brand new and high quality wireless charging plate for mobile phones
Wireless Charger allows you to charge your phone without plugging the cable
Easy to use, simply drop phone to start charging
Adopt Qi wireless charging standard, all QI standard electronic products can be used to charge with this transmitter
Ultra slim design, compact and light weight without increasing additional weight of the mobile phone
Easy to use.
The receiver can be attached to the the battery all the time, and it works well with any Qi-enabled charger
It would not interrupt the normal use of mobile phone

C$16.55 C$19.53

FANTASY Wireless Charger & Wireless Charging Receiver, For Galaxy Note Edge/N915V/N915P/N915T/N915A (Black)

Brand new and high quality wireless charging plate for mobile phones
Wireless Charger allows you to charge your phone without plugging the cable
Easy to use, simply drop phone to start charging
Adopt Qi wireless charging standard, all QI standard electronic products can be used to charge with this transmitter
Ultra slim design, compact and light weight without increasing additional weight of the mobile phone
Easy to use.
The receiver can be attached to the the battery all the time, and it works well with any Qi-enabled charger
It would not interrupt the normal use of mobile phone

C$16.55 C$19.86

T8 QI Certified Fast Charging Station 3 in 1 Foldable Design Charging Dock

With dual chargin coll design:The new 3 in 1 wireless charging station can provide a more stable charging experience without the intermittent charging or overheating caused by mismatch. Improved the charging speed, eliminate the hassle of finding the "Best Location".
Safety charging:wireless phone charger provides temperature control and voltage protection, and short-circuit prevention, and the charger back is equip with ventilation holes to ensure safe and stable charging. This wireless charger is Qi-certified, double guarantee and dual safety provide you safety experience. Anti-slip silicone pads on the base and the bottom protect your devices from scratching and sliding off while charging.
Input:9V/2A;9V/3A
Features:3-in-1 wireless charger/ foldable design/ fast QI wireless charger
Material:ABS+PC+silica
Transmission distance:less than 2-6mm
Output:Phone:15W(compatible 10W/7.5W/5W); For Airpods:3W;Watch:5W

C$29.14 C$35.55

NILLKIN Magic Tag Plus Wireless Charging Receiver with USB-C/Type-C Port (Short Flex Cable)

Mini and lightweight, convenient to carry about for tablet wireless charging.
Metal Type-C interface, double side are accessible.
Made for Tablets.
Firm fit, stable transmission performance.
The charging speed is comparable to the original charger.

C$23.24 C$28.36

Original OLED LCD Screen for Motorola One Zoom with Digitizer Full Assembly (Black)

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$42.82 C$53.10

Original LCD Screen for Motorola E4 XT1765/XT1766 (US Version)with Digitizer Full Assembly (Black)

Replacement LCD screen + touch screen digitizer assembly for Motorola E4 XT1765 / XT1766 (US Version)
Replace your broken or unusable item with a new one
Make your device look more refreshing than ever
Completely fit and work
Each item has been checked and in good condition before shipping
Professional installation is highly recommended. We will not be responsible once the screen is installed
Before Installation Notes
Tips 1: Test before installation

C$18.97 C$22.96

Original LCD Screen for Motorola One Vision with Digitizer Full Assembly

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$43.98 C$54.53

Original LCD Screen for Motorola One Action with Digitizer Full Assembly

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$43.98 C$54.53

TFT LCD Screen for Motorola Moto E6 Plus with Digitizer Full Assembly

Replacement LCD screen + touch screen digitizer assembly for Motorola Moto E6 Plus
Replace your broken or unusable item with a new one
Make your device look more refreshing than ever
Completely fit and work
Each item has been checked and in good condition before shipping
Professional installation is highly recommended. We will not be responsible once the screen is installed
Before Installation Notes
Tips 1: Test before installation

C$16.69 C$19.20

TFT LCD Screen for Motorola Moto G8 Play/One Macro (XT2016-1)with Digitizer Full Assembly

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$18.33 C$21.25

LCD Screen for Motorola Moto Z4 with Digitizer Full Assembly (Black)

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$49.83 C$57.30

TFT LCD Screen for Motorola Moto G7 Plus with Digitizer Full Assembly (Black)

Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G7 Plus
Replace your broken or unusable item with a new one
Make your device look more refreshing than ever
Completely fit and work
Each item has been checked and in good condition before shipping
Professional installation is highly recommended. We will not be responsible once the screen is installed
Before Installation Notes
Tips 1: Test before installation

C$19.17 C$22.05