Cameras & Photo

View as Grid List

Sort by

Display per page

XTUGA J02 2.4G Stereo Wireless In-Ear Mini Monitor System with Transmitter & Receiver (Black)

2.4GHz wireless in-ear monitoring system, can build a personal or team monitoring system. Wireless signal transmission, low noise, low latency.
6 channels play simultaneously without interference, delay less than 12ms, and provide clear and delicate audio at any volume.
Transmitter and receiver with rechargeable lithium battery, battery life up to 6-8 hours, to ensure every performance has an excellent performance.
Using advanced circuit design, excellent chip, clear reception blind spot, so that the systems receiving signal is stable.
Frequency response range: 20-20kHz
Transmission distance: 30m
Dynamic range: greater than 105dB
Charging interface: Type-C

C$67.67 C$79.85

XTUGA SF-1 Wireless XLR Transmitter & Receiver UHF Wireless Adapter for Wired Mic/Guitar (Black)

16 frequency points, support multiple sets to use at the same.
Wide transmission range, stable signal,you can free to move and immerse yourselves on the stage.
It is not only suitable for XLR microphones (built in 0V/5V/48V mode), but also perfect for guitar audio reception.
It can support one transmitter working 6 hours which ensures great performance for every use.
Small and portable, no need to worry about cables mess
Frequency range: 570MHz-596MHz
Wireless transmission range: 50-80m

C$51.19 C$62.96

BEXIN W-334C Portable DSLR Camera 2 in 1 Carbon Fiber Tripod Detachable Monopod (Black)

Premium Carbon Fiber Build: Crafted from high-density carbon fiber, this tripod is lightweight yet incredibly strong, offering excellent stability while reducing the load during travel. Ideal for photographers and videographers on the go.
2-in-1 Tripod & Monopod Design: One of the legs can be easily detached and combined with the center column to form a fully functional monopod, perfect for tight spaces or fast-moving scenes. Quick switch between tripod and monopod modes to adapt to your shooting needs.
Adjustable Height: With a working height range of approximately up to 152cm, this tripod offers flexibility for various shooting angles and scenarios.
Compact and Portable: The tripod folds down to a compact 45cm, making it easy to carry and store in the included carrying bag.
Sturdy and Secure: Non-slip rubber feet and a hook for adding counterweight ensure stability on uneven terrain. The tripod supports up to 20kg, suitable for DSLRs, mirrorless cameras, spotting scopes, and more.
Model: W-334C
Weight: Approximately 1450g
Folded Height: About 45cm

C$209.54 C$240.98

TRIOPO TR-982IIC Flash Light Speedlite for Canon (Black)

GN58, 180mm, ISO 100, supports multiple flash modes: TTL/ M/ MULT/ S1 / S2 / Master/ Slave. Highly sensitive sensor supports far wireless triggering distance.
Multi-contact hot shoe. With high-speed synchronization function, it supports 1/8000s trigger on camera and off camera. In high speed sync mode, using aperture priority for filling light for the shot subject, make your shooting more comfortable.
Suitable for canon camera wireless flash system, realize machine TTL, manual and frequency flash. 0.1-3s recycle time, supports high speed continuous shooting.
The rotatable LCD screen is clear for displaying multiple readings, the buttons and knob can help you to adjust various settings quickly and easily.
Using strobe, a series of flashes can be used to move multiple images of an object over a photograph.
Material: Plastic
Flash Index: GN58 (180mm, ISO100)
TTL Mode: Compatible for Canon E-TTL

C$126.65 C$155.77

1/4 inch Thread PU Leather Camera Half Case Base for FUJIFILM X-H1 (Black)

High quality and extremely durable material.
Compact, lightweight and extremely durable design.
Protect your digital camera from dust, finger prints, and scratches.
With 1/4 inch screw at the bottom, connect your camera stable.
Compatible with FUJIFILM X-H1.

C$17.90 C$22.38

1/4 inch Thread PU Leather Camera Half Case Base for FUJIFILM X-H1 (Coffee)

High quality and extremely durable material.
Compact, lightweight and extremely durable design.
Protect your digital camera from dust, finger prints, and scratches.
With 1/4 inch screw at the bottom, connect your camera stable.
Compatible with FUJIFILM X-H1.

C$17.90 C$22.20

BEXIN P365C Camera Carbon Fiber Monopod Travel Live Selfie Bracket Holder

Made of carbon fiber, high strength and wear resistance, compact and lightweight, ideal journey, sports, and wildlife photography companion
Reversible 1/4 inch & 3/8 inch screw on mounting plate enables the attachment of virtually any camera, camcorder, or ball head
5 sections with anti-rotation twist locks to enhance stability
Non-slip foam rounded handgrip and wrist strap ensure a safe hold and avoid risk of camera dropping
Removable non-slip rubber mat and screw-in spike for different shooting occasions, carrying bag offered for convenient travelling around
Material: Carbon Fiber
Load Capacity: 20kg
Full Expand Height: 167cm

C$94.95 C$114.89

BEXIN P366C Camera Carbon Fiber Monopod Travel Live Selfie Bracket Holder

Made of carbon fiber, high strength and wear resistance, compact and lightweight, ideal journey, sports, and wildlife photography companion
Reversible 1/4 inch & 3/8 inch screw on mounting plate enables the attachment of virtually any camera, camcorder, or ball head
6 sections with anti-rotation twist locks to enhance stability
Non-slip foam rounded handgrip and wrist strap ensure a safe hold and avoid risk of camera dropping
Removable non-slip rubber mat and screw-in spike for different shooting occasions, carrying bag offered for convenient travelling around
Material: Carbon Fiber
Load Capacity: 19kg
Full Expand Height: 166cm

C$101.75 C$127.18

BEXIN P336C Camera Carbon Fiber Monopod Travel Live Selfie Bracket Holder

Made of carbon fiber, high strength and wear resistance, compact and lightweight, ideal journey, sports, and wildlife photography companion
Reversible 1/4 inch & 3/8 inch screw on mounting plate enables the attachment of virtually any camera, camcorder, or ball head
6 sections with anti-rotation twist locks to enhance stability
Non-slip foam rounded handgrip and wrist strap ensure a safe hold and avoid risk of camera dropping
Removable non-slip rubber mat and screw-in spike for different shooting occasions, carrying bag offered for convenient travelling around
Material: Carbon Fiber
Load Capacity: 14kg
Full Expand Height: 166cm

C$86.17 C$100.83

For Canon EOS 6D Mark II Shutter/Aperture Dial Wave Wheel

Camera mode shutter / aperture dial wheel replacement part..
Repair and fix your broken or unusable item with it.
Each item has been checked and in good condition before shipping.
Completely fit and work.
Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

C$10.52 C$12.61

For Canon Ixus 130 LCD Display Screen

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$45.92 C$57.40

For Canon PowerShot A3000 LCD Display Screen

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable

C$21.72 C$26.72