Replacement Parts

View as Grid List

Sort by

Display per page

CP-4040 6 Way Fuse Block with 12pcs Fuses and 12pcs Terminals

12V fuse block comes with negative busbar, damp proof cover. All busbars and fuse clips are nickel-plated copper, which has corrosion resistance and good conductivity.
Red LED warning light will be on when the corresponding fuse is blown. You can immediately know and timely processing since this waterproof fuse block will indicate exactly where there is a short circuit or other fault.
This 6-Circuit blade fuse box is widely used automotive car boat, suitable for all marine, motor-home, automotive & motorsport applications.
Adopts PBT anti-flame-resistance, high-low temperature and environmental protection materials, this boat fuse block is mechanically strong which will hardly cause breakage, deformation, burning and short circuit.
The capacity of the marine fuse box is 100A, which meets the application environment of most fuse boxes.

C$15.50 C$18.44

Universal 50mm Automatic Tow Bar Ball Cap Trailer Soft Rubber Protective Cap (Red)

Made of PVC material, easy to use, protects the exposed trailer ball, has a long service life, and can replace damaged or old trailer protective caps.
Universal 50mm automatic tow bar ball cap trailer protective cap, which is a product used to protect the trailer tow ball.
Wide range of applications, including trucks, trucks, semi-trailers, cars and ships, etc.
The function of this product is to prevent the tow ball from being corroded and damaged by grease and dirt. It can effectively protect the exposed tow ball and extend its service life. At the same time, it can also replace damaged or aging trailer protective caps. This product features high-quality materials, durability and reliability, making it a practical trailer accessory.
Material: Soft PVC
Size: 50mm
Height: 55mm
Application scope: truck/truck/semi-trailer/car/ship

C$7.52 C$9.25

Universal 50mm Automatic Tow Bar Ball Cap Trailer Soft Rubber Protective Cap (Yellow)

Made of PVC material, easy to use, protects the exposed trailer ball, has a long service life, and can replace damaged or old trailer protective caps.
Universal 50mm automatic tow bar ball cap trailer protective cap, which is a product used to protect the trailer tow ball.
Wide range of applications, including trucks, trucks, semi-trailers, cars and ships, etc.
The function of this product is to prevent the tow ball from being corroded and damaged by grease and dirt. It can effectively protect the exposed tow ball and extend its service life. At the same time, it can also replace damaged or aging trailer protective caps. This product features high-quality materials, durability and reliability, making it a practical trailer accessory.
Material: Soft PVC
Size: 50mm
Height: 55mm
Application scope: truck/truck/semi-trailer/car/ship

C$7.52 C$8.95

A8702 6 inch RV Skylight Vent D-hole Fan Blade (White)

Easy to install, powerful and quiet operation
Made of plastic, long service life
Fan size: 6 inches
Fan installation hole: D hole
Function: Replaceable RV skylight fan, quickly circulates the air inside the RV, making your trip more comfortable

C$12.78 C$15.72

Outboard Water Pump Impeller Repair Kit for YAMAHA F6 F8 4-Stroke 68T-W0078-00 (Silver + Black)

Made of corrosion-resistant, high-strength materials to extend service life and ensure efficient operation of the pump.
Repair kits usually contain impellers, seals and other necessary parts, ensuring that repair work can be completed in one go as far as possible without the need to search for missing parts.
Designed with the specific model and size of the pump in mind, the parts in the repair kit are precisely matched to the original parts to restore the performance of the pump.
Replacing a worn or damaged impeller can significantly improve the efficiency and output of the pump, reduce energy waste and extend the service life of the pump.
Using a repair kit to repair the impeller and related components is a cost-effective solution compared to replacing the entire pump, significantly reducing maintenance costs.
OE: 68T-W0078-00, 18-3450
Material: Rubber + Metal
Number of Blades: 6

C$31.80 C$39.11

Outboard Water Pump Impeller Repair Kit with Shell for YAMAHA 20/25HP 6L2-W0078-00-00 (Silver + Black)

Made of corrosion-resistant, high-strength materials, such as stainless steel or special alloys, to extend the service life and ensure efficient operation of the pump.
Repair kits usually contain impellers, seals and other necessary parts, ensuring that the repair work can be completed in one go as far as possible without the need to search for missing parts.
Designed with the specific model and size of the pump in mind, the parts in the repair kit are precisely matched to the original parts to restore the performance of the pump.
Replacing a worn or damaged impeller can significantly improve the efficiency and output of the pump, reduce energy waste and extend the service life of the pump.
Compared with replacing the entire pump, repairing the impeller and related components with a repair kit is a cost-effective solution that significantly reduces maintenance costs.
OE: 6L2-W0078-00-00
Material: Rubber + 316 stainless steel + plastic
Number of blades: 6

C$36.82 C$44.19

Outboard Water Pump Impeller for Mercury/Voyager/Yamaha 689-44352-02 (Black)

The water pump impeller is made of rubber, which is corrosion-resistant and wear-resistant, and can adapt to long-term use in seawater or freshwater environments.
It has the characteristics of high efficiency and energy saving, and can better guide the water flow during work, improve work efficiency, and reduce energy consumption costs.
The miniaturized water pump impeller has the characteristics of small space occupation and light weight, which is convenient for transportation and installation.
The blade arrangement and material selection of the water pump impeller can make the water pump more stable during operation and less prone to noise and vibration.
It is simple to install and easy to use. It can be installed and disassembled quickly and quickly, and is convenient for regular inspection and replacement.
OE: 689-44352-02, 47-84797M
Material: Rubber
Number of blades: 6

C$14.89 C$18.31

Outboard Water Pump Impeller Repair Kit for YAMAHA 60HP 6K5-W0078-01 (Silver + Black)

Made of corrosion-resistant, high-strength materials, such as stainless steel or special alloys, to extend the service life and ensure efficient operation of the pump.
Repair kits usually contain impellers, seals and other necessary parts, ensuring that the repair work can be completed in one go as far as possible without the need to search for missing parts.
Designed with the specific model and size of the pump in mind, the parts in the repair kit are precisely matched to the original parts to restore the performance of the pump.
Replacing a worn or damaged impeller can significantly improve the efficiency and output of the pump, reduce energy waste and extend the service life of the pump.
Compared with replacing the entire pump, repairing the impeller and related components with a repair kit is a cost-effective solution that significantly reduces maintenance costs.
OE: 6K5-W0078-01
Material: Rubber + 316 stainless steel
Number of blades: 6

C$30.49 C$35.37

Outboard Water Pump Impeller for Milwaukee M18 49162771 (Black)

The water pump impeller is made of rubber+brass, which is corrosion-resistant and wear-resistant, and can adapt to long-term use in seawater or freshwater environments.
It has the characteristics of high efficiency and energy saving, and can better guide the water flow during work, improve work efficiency, and reduce energy consumption costs.
The miniaturized water pump impeller has the characteristics of small space occupation and light weight, which is convenient for transportation and installation.
The blade arrangement and material selection of the water pump impeller can make the water pump more stable during operation and less prone to noise and vibration.
It is simple to install and easy to use. It can be installed and disassembled quickly and quickly, and is convenient for regular inspection and replacement.
OE: 49-16-2771, 49162771
Impeller height: 22.4mm
Inner shaft insertion diameter: 8mm

C$18.84 C$22.60

For Mercedes-Benz GLC W253 2016-2022 Car Dashboard Small Air Outlet Air-conditioning Outlet 2536803802, Style:Right Side (Dark Coffee Brown)

Original car size, direct replacement.
Easy to install and durable.
Correct connectors are not cut or spliced.
Very suitable for your car, very good to improve the appearance of your car
Material: ABS+PC
Weight: 11.5g
Size: 90x43mm
OE: 2536803802

C$16.12 C$20.15

For Mercedes-Benz GLC W253 2016-2022 Car Dashboard Small Air Outlet Air-conditioning Outlet 2536803802, Style:Left Side (Plating Color)

Original car size, direct replacement.
Easy to install and durable.
Correct connectors are not cut or spliced.
Very suitable for your car, very good to improve the appearance of your car
Material: ABS+PC
Weight: 11.5g
Size: 90x43mm
OE: 2536803802

C$38.52 C$44.69

For Mercedes-Benz GLC W253 2016-2022 Car Dashboard Small Air Outlet Air-conditioning Outlet 2536803802, Style:Left Side (Dark Coffee Brown)

Original car size, direct replacement.
Easy to install and durable.
Correct connectors are not cut or spliced.
Very suitable for your car, very good to improve the appearance of your car
Material: ABS+PC
Weight: 11.5g
Size: 90x43mm
OE: 2536803802

C$16.12 C$18.69