Battery system analytical tool for cars, trucks and motorcycles with the function of testing from 12V 24V various batteries.
It built with printer, it can fast and accurately find out your battery status, including charging states, life percentage, internal resistance and so on.
It also can help you to check the cranking status of your vehicle, battery system charging malfunction etc.
It is a professional automotive diagnostic tool for your all kinds of battery related issues, it provides professional battery graphing voltage monitoring and uploading function for deep analysis.
It can test series kinds of batteries including regular flooded, AGM flat, AGM spiral, GEL, EFB, Lithium battery etc.
High sensitivity: Brake fluid detector with 260 mm gooseneck probe for flexible detection.
Stable performance: Chrome-plated detector is resistant to oil and oxidation.
Accurate Assessment: Better than traditional methods that are difficult to provide accurate data, accurate assessment of oil performance.
Brake pressure was transmitted by brake fluid, the pressure transmitter will out of function once brake fluid includes too much water. In order to safe-driving, we must test the water ratio scale in brake fluid regularly. The brake fluid tester helps us do current maintenance, and make sure we drive in safety condition.
Humanized handheld design: the handheld part of the body is made of silicone material, which has excellent feel and lightweight design, and can be easily operated with one hand.
This diagnostic tool serves as an ignition coil tester, injector tester, and stepper motor tester, catering to a wide range of automotive diagnostic needs.
1.8 inch Color display: Multiple functions can be fully displayed on one screen, and the color screen can display various parameters more humanely.
Adds a multimeter function that can measure resistance and voltage, which is helpful for judg-ing the quality of components.
The step motor drive current increases. Improve PWM driving to avoid damage to test components. DC/DC power supply to reduce heat generation.
The new solution uses a 32-bit ARM chip, which can control all function outputs and collect various parameters.Output can be shut down in case of overcurrent.
Test light remedy the various deficiencies, VT100 has multi-function, such as automotive voltage tester, positive and negative polarity tester, car fuse tester, signal tester, design with exquisite workmanship, practical and durable, easy to use.
LED digital indicator, bidirectional voltage testing
Large size alligator clip, switch for different three working modes
Replaceable test light bulb, predictable frequency
Steel probe protective cover, two sharp stainless steel probes
Only for testing 5-30V, Please make sure that the voltage value of the product to be tested is within this range before testing.
When the LED indicator light is bright but test light bulb is not bright, it means bulb burnt out and should be replaced.
Can test whether the circuit is in a continuous state or an open circuit state. (The green light is on to indicate that the circuit is in a continuous state, and the green light is off to indicate that the circuit is in an open circuit state.)
Can quickly test the working state of the circuit diode component and determine the open circuit and continuity.
Grounding test: For whether there is a large current flowing through the component, the good grounding of the negative pole of the component can be tested. (The green light is on and a buzzer sounds, indicating good grounding, and the green light is on without a buzzer, indicating poor grounding.)
Current overload protection: When the current is overloaded or underloaded, the machine will automatically disconnect the circuit for protection and sound a buzzer alarm to reduce unnecessary losses.