Use guide, removal of the timing chain will require the removal of the sump, ensure the engine is at TDC No 1 cylinder, ensure the chain tensioner is fully retracted and held in the retracted position using a suitable pin, and remove the crankshaft pulley using an appropriate pulley holding tool
Specially designed to fit the long petrol injectors used on the models equipped with the 5.0lt V8 petrol engines.
The angled slide hammer shafts gives improved access when working on the rear most injectors.
Angled and flexible injector clamp system.
OEM 310-197.
Fits for Jaguar X150, XK Series, X250 (XF) and XJ models (V8 5.0lt petrol engines) / Land Rover Discovery 4, Range Rover, Range Rover Sport (V8 5.0lt petrol engines).
Clutch retaining tool used to lock the clutch basket for VAG models with DSG 02E 6 speed transmissions.
This tool is used to assist in the removal and fitting of the multi-plate clutch stack when working on the DSG 02E 6 speed transmissions used across the VAG ranges
Application: VAG DSG 02E 6 Speed vehicles
Fits for Volkswagen Golf, Touran / Audi A3 2004- /Audi TT 1999-
Fuel injector install tool compatible with BMW N20, and new N55 engine.
BM number: 130320, note: this injector not fit old N55 engine
Specially designed to install and remove the injector for N20 N55 engine.
Tips: you much evenly install the tool first before installing or removing the injectors. The tool may not come fully tighten, so you much first make sure you tighten everything first before you ue the tool.
Made of steel, high hardness, stable and strong, not easy broken.
It is the best electrical tester for reducing diagnostic time in automotive electrical systems.
Its long cable makes your testing easily.
After a simple hook-up of the unit to the battery of vehicle, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.
It has short-circuit protection and can test for bad ground contacts instantly.
Easy to install and use, a perfect accessory for your car. Powered by car cigarette lighter charger or 2 x LR 44 batteries
Backlight will open when the clock is powered by car cigarette lighter, there would be no back light when it is powered by backup batteries
When it connects with car, its back light is light up and all the contents (including the time, temperature and volt) will be displayed on the LCD screen
Car battery voltmeter, Pedestal 180-degree revolve. Also has the function of freeze alert. Alert you to your car battery voltage and its alarm sensor notifies you of excessive or under normal voltage operations
Capable of switching temperature display unit Celsius / Fahrenheit degree. Display accurate temperature readings in and outside of the car. The LED back light design allows you to accurately read the digits in the dark